Nimi Mock Test-Transformer for big success in NCVT online Electrician

Nimi mock Test -Transformer

ITI Electrician Trade से संबंधित Free Bharat Skills NIMI Mock Test, NCVT Online ITI Exam Study Material, Notes, MCQ Test Series, Bharat Skills NIMI Question Bank, DGT Syllabus तथा Latest Job और Career Notifications यहाँ उपलब्ध हैं।

यहाँ आपको ITI Exam Updates, NCVT Online CBT Exam की तैयारी, ITI Result, Marksheet, Admit Card, Latest Jobs News और महत्वपूर्ण Notifications की जानकारी भी प्राप्त होगी।

NIMI Mock Test - Transformer

ITI की परीक्षा ऑनलाइन CBT (Computer Based Test) मोड में आयोजित की जाती है, जिसमें मुख्य रूप से Objective Type प्रश्न पूछे जाते हैं। परीक्षा में आने वाले अधिकांश प्रश्न NIMI Question Bank एवं Bharat Skills Study Material पर आधारित होते हैं, इसलिए नियमित Mock Test Practice करना सफलता के लिए बेहद महत्वपूर्ण है।

सभी ITI Trades के विद्यार्थियों के लिए NIMI Mock Test परीक्षा की तैयारी का एक महत्वपूर्ण हिस्सा है। यदि आप NCVT ITI Exam की तैयारी कर रहे हैं, तो नीचे दिए गए ITI NIMI Mock Test आपकी प्रैक्टिस को बेहतर बनाकर परीक्षा में अच्छे अंक प्राप्त करने में सहायता करेंगे।

Nimi mock Test -Transformer

Transformer

कुल प्रश्न - 35

समय - 60 मिनट

1 / 37

1. What is the name of transformer? (ट्रांसफार्मर का नाम क्या है?)

2 / 37

2. What is the purpose of tap changing in power transformers? (पावर ट्रांसफार्मर में टैप बदलने का उद्देश्य क्या है?)

3 / 37

3. What is the composition of steel and silicon steel in transformer core? (ट्रांसफार्मर कोर में स्टील और सिलिकॉन स्टील की संरचना क्या है?)

4 / 37

4. Which cooling method is used in pole mounting distribution transformer? (पोल माउंटिंग डिस्ट्रीब्यूशन ट्रांसफार्मर में किस शीतलन विधि का उपयोग किया जाता है?)

5 / 37

5. What is the disadvantage of auto transformer? (ऑटो ट्रांसफार्मर के क्या नुकसान हैं?)

6 / 37

6. What is the name of the part in power transformer? (पावर ट्रांसफार्मर में किस भाग का नाम है?)

7 / 37

7. What is the cooling method of transformer? (ट्रांसफार्मर को ठंडा करने की विधि क्या है?)

8 / 37

8. What is the purpose of using laminated core in transformer? (ट्रांसफार्मर में लैमिनेटेड कोर का उपयोग करने का उद्देश्य क्या है?)

9 / 37

9. What is the relationship between primary voltage (E1, V1) and secondary voltage (E2, V2) in a ideal transformer? (एक आदर्श ट्रांसफार्मर में प्राथमिक वोल्टेज (E1, V1) और द्वितीयक वोल्टेज (E2, V2) के बीच क्या संबंध है?)

10 / 37

10. Which type of transformer is used for high frequency application? | उच्च आवृत्ति अनुप्रयोग के लिए किस प्रकार के ट्रांसफार्मर का उपयोग किया जाता है?

11 / 37

11. What is the function of conservator in transformer? | ट्रांसफार्मर में कंजरवेटर का कार्य क्या है?

12 / 37

12. Which loss of transformer is determined by short circuit test? | शॉर्ट सर्किट टेस्ट द्वारा ट्रांसफार्मर के किस हानि का निर्धारण किया जाता है?

13 / 37

13. Calculate the voltage regulation in percentage of the transformer if the no load voltage is 240 volt and full load voltage is 220 volt? | ट्रांसफार्मर में वोल्टेज के प्रतिशत विनियमन की गणना करें, यदि शून्य भार वोल्टेज 240 वोल्ट है और पूर्ण भार वोल्टेज 220 वोल्ट है?

14 / 37

14. What is the condition for obtaining maximum efficiency from transformer? | ट्रांसफार्मर से अधिकतम दक्षता प्राप्त करने के लिए क्या शर्त है?

15 / 37

15. What is the function of top float switch of buchholz relay in transformer? | ट्रांसफार्मर में बुखोल्ज़ रिले के शीर्ष फ्लोट स्विच का कार्य क्या है?

16 / 37

16. Why the core of current transformer is having low reactance and low core losses? | वर्तमान ट्रांसफार्मर का कोर कम प्रतिघात और कम कोर हानि क्यों कर रहा है?

17 / 37

17. How the error in reading of a potential transformer can be reduced? | विभव ट्रांसफार्मर को पढ़ने में त्रुटि को कैसे कम किया जा सकता है?

18 / 37

18. Why the load is disconnected before the OFF load tap changing operation? | ऑफ लोड टैप बदलने के ऑपरेशन से पहले लोड क्यों काट दिया जाता है?

19 / 37

19. Which construction technique is used to reduce copper loss in larger transformers? | बड़े ट्रांसफॉर्मर में तांबे के नुकसान को कम करने के लिए किस निर्माण तकनीक का उपयोग किया जाता है?

20 / 37

20. Which condition is absolutely essential for parallel operation of two transformers? | दो ट्रांसफार्मर के समानांतर संचालन के लिए कौन सी स्थिति बिल्कुल आवश्यक है?

21 / 37

21. Which transformer is used to measure high voltage installations? | उच्च वोल्टेज प्रतिष्ठानों को मापने के लिए किस ट्रांसफार्मर का उपयोग किया जाता है?

22 / 37

22. How does the moisture is controlled in breather fitted on power transformers? | पावर ट्रांसफार्मर पर लगे हुए ब्रेदर में नमी को कैसे नियंत्रित किया जाता है?

23 / 37

23. Which power loss is assessed by open-circuit test on transformer? | ट्रांसफार्मर पर ओपन-सर्किट परीक्षण द्वारा किस शक्ति हानि का आकलन किया जाता है?

24 / 37

24. What is the purpose of providing explosion vent in a power transformer? | पावर ट्रांसफार्मर में विस्फोट वेंट प्रदान करने का उद्देश्य क्या है?

25 / 37

25. What is the function of buchholz relay in power transformer? | बिजली ट्रांसफार्मर में बुखोल्ज रिले का कार्य क्या है?

26 / 37

26. Why distribution transformers are normally connected as primary in delta and secondary in star? | वितरण ट्रांसफार्मर सामान्य रूप से डेल्टा में प्राथमिक और स्टार में ‌द्वितीयक के रूप में क्यों जुड़े हुए हैं?

27 / 37

27. Which type of emf is induced in an ideal two winding transformer? | आदर्श दो वाइंडिंग ट्रांसफार्मर में किस प्रकार का ईएमएफ प्रेरित होता है?

28 / 37

28. How to determine copper loss in a transformer? | एक ट्रांसफार्मर में तांबे के नुकसान का निर्धारण कैसे करें?

29 / 37

29. Why ferrite core is used in radio receivers? फेराइट कोर का उपयोग रेडियो रिसीवर में क्यों किया जाता है?

30 / 37

30. What is the advantage of stepped core arrangement in larger transformers? | बड़े ट्रांसफार्मर में चरणबद्ध कोर व्यवस्था का क्या फायदा हैर

31 / 37

31. What is the name of transformer? ( ट्रांसफार्मर का नाम क्या है? )

32 / 37

32. What is the function of leak transformer in high pressure sodium vapour lamp circuit? | उच्च दाब सोडियम वाष्प लैंप परिपथ में लीक ट्रांसफॉर्मर का क्या कार्य है?

33 / 37

33. Which material is used in breather to prevent moisture entering in the transformer ail? | ट्रांसफार्मर तेल में नमी को रोकने के लिए ब्रेदर में किस सामग्री का उपयोग किया जाता है?

34 / 37

34. Why primary of potential transformer is wound with thin wire and large number of turns? | क्यों विभव ट्रांसफार्मर का प्राथमिक पतली तार और बड़ी संख्या में घुमाों के साथ कुंडलित किया जाता है?

35 / 37

35. Which material is used to make core of power transformer? | पावर ट्रांसफार्मर का कोर बनाने के लिए किस सामग्री का उपयोग किया जाता है?

36 / 37

36. Which is determined by the crackle test of transformer oil? | ट्रांसफार्मर के तेल के क्रैकल टेस्ट से किसका निर्धारण होता है?

37 / 37

37. What is the relationship between primary voltage (E, V₁) and secondary voltage (E2, V₂) in a ideal transformer? | एक आदर्श ट्रांसफार्मर में प्राथमिक वोल्टेज (E₁, V₁) और माध्यमिक वोल्टेज E₂, V₂) के बीच क्या संबंध है?

Your score is

The average score is 60%

0%

Test देने से पहले ऊपर दिये गये NIMI MOCK TEST से प्रेक्टिस कर सकते है-

Test Series

उपरोक्त प्रश्न Bharat Skills Portal पर उपलब्ध NIMI Question Bank एवं CBT Exam Pattern के आधार पर तैयार किए गए हैं। ITI की ऑनलाइन CBT परीक्षा में प्रायः इसी प्रकार के Objective Type प्रश्न पूछे जाते हैं, तथा ऊपर दिए गए प्रश्नों में से भी कई प्रश्न परीक्षा में आने की संभावना रहती है।

यदि आप अपनी तैयारी को और अधिक मजबूत बनाना चाहते हैं, तो नीचे दिए गए अतिरिक्त Mock Test, MCQ Practice Sets एवं NIMI Question Bank के माध्यम से नियमित अभ्यास कर सकते हैं। नियमित प्रैक्टिस से आपकी Speed, Accuracy और Technical Knowledge में सुधार होगा तथा NCVT CBT Exam Pattern को समझने में भी सहायता मिलेगी।

ITI Electrician NCVT Mock Test - Transformer for ncvt online exam

Mock Test - ट्रांसफर्मर (Transformer) Q1-50

कुल प्रश्न - 50

समय - 60 मिनट

1 / 50

1. ट्रांसफार्मर कार्य करता है- (Transformer works-)

2 / 50

2. परिणामित्र में लोह क्रोड का उपयोग....के लिए किया जाता है। (Iron core in transformer is used for….)

3 / 50

3. ट्रांसफार्मर की क्रोड को पट्टलित बनाने से कम की जा सकेगी है (This can be reduced by making the core of the transformer laminated. )

4 / 50

4. एक सिंगल फेज ट्रांसफार्मर की क्रोड में स्थापित फ्लक्स होता है- (The flux established in the core of a single phase transformer is-)

5 / 50

5. ट्रांसफार्मर में. ..परिवर्तन करने का गुण नहीं होता है। (In the transformer. ..does not have the ability to change.)

6 / 50

6. एक आदर्श ट्रांसफार्मर ऐसा ट्रांसफार्मर होता है जिसमें (An ideal transformer is a transformer in which)

7 / 50

7. एक 2000/200 V, 50 Hz, 20 kVA आदर्श ट्रांसफार्मर की प्राइमरी क्वाइल में 66 टर्न है, इसकी सेकंडरी क्वाइल में टर्नो की संख्या होगी...... (A 2000/200 V, 50 Hz, 20 kVA ideal transformer has 66 turns in its secondary coil, the number of turns in its primary coil will be......)

8 / 50

8. ट्रांसफार्मर की प्राथमिक व द्वितीयकं दोनों वाइंडिंग में समान होता  है- (Two things which are common in both primary and secondary of transformer-)

9 / 50

9. एक ट्रांसफार्मर बहुत कम आवृत्ति पर बड़ी मुश्किल में परिचालित होता है क्योंकि- (A transformer operates with great difficulty at very low frequency because-)

10 / 50

10. यदि एक शक्ति ट्रांसफार्मर बहुत अधिक आवृत्ति पर परिचालित होता है तो (If a power transformer operates at a very high frequency then)

11 / 50

11. बडे ट्रांसफार्मरों में क्रोड का आकार वृत्तिय अनुप्रस्थ क्षेत्र में बनाया जाता है ताकि. .. कम किये जा सकें। (In large transformers the core is shaped in a circular cross-sectional area so that ..can be reduced.)

12 / 50

12. ट्रांसफार्मर की प्राथमिक व द्वितीयक क्वाइल एक दूसरे के उपर वाउण्ड की जाती है ताकि. ..कको कम किया जा सके। (The primary and secondary windings of the transformer are wound on top of each other so that. ..which can be reduced.)

13 / 50

13. अधिकतम क्षमता के दौरान ट्रान्सफॉर्मर का कॉपर लौस है 1000 वॉट तो आइरन लौस क्या होगा? (If the copper loss of the transformer is 1000 watts at maximum capacity then what will be the iron loss?)

14 / 50

14. जब दो ट्रांसफार्मर समान्तर में काम कर रहे है तो किसके आधार पर लोड बाटेंगे।  (When two transformers are working in parallel, on what basis will the load be distributed?)

15 / 50

15. 1 KVA, 240 V/120V सिंगल फेज ट्रांसफार्मर का पूरा लोड करंट 0.8 pf पर क्या होगा ? (What will be the full load current of a 1 KVA, 240 V/120 V single phase transformer at 0.8 pf?)

16 / 50

16. शैल टाइप के लिए छोटे प्रकार का ट्रान्सफार्मर कोर प्रायः इसमें प्रयोग होते है (Small type transformer core for shell type is often used in this.)

17 / 50

17. दो वाइन्डिंग ट्रांसफार्मर में, लोड (उत्पादन) साइड के रूप में जाना जाता है. (In a two winding transformer, one is known as the load (production) side.)

18 / 50

18. 1 के.वी. 240V/120V एकल चरण ट्रांसफार्मर में करंट की गणना लो वोल्टेज साइड में करें- (1 KV Calculate the current in 240V/120V single phase transformer in low voltage side-)

19 / 50

19. ऑटो ट्रांसफार्मर का एप्लीकेशन क्या है? (What is the application of auto transformer?)

20 / 50

20. एक विधि जो, ठंडा करने के लिए आम तौर पर अपनायी जाती है, 100 के वी ए तक के कम क्षमता वाले वितरण ट्रांसफार्मर के लिए? (Which method is generally adopted for cooling of low capacity distribution transformers up to 100 KVA?)

21 / 50

21. ट्रांसफार्मर के ब्रिथर में प्रयोग होने वाला ताजा सिलिका जेल किस रंग का होता है? (What color is the fresh silica gel used in breather of transformer?)

22 / 50

22. कौन सा तरीका ट्रांसफार्मर के समूह में, 3 चरण ट्रांसफार्मर कार्यरत कनेक्शन के लिए सबस्टेशन पर ट्रांसमिशन लाइन के अंत में होता है? (In which group of transformers, the 3 phase transformer is at the end of the transmission line at the substation for the working connection? )

23 / 50

23. कौन सा तरीका ट्रांसफार्मर के समूह में, 3 चरण ट्रांसफार्मर कार्यरत कनेक्शन के लिए सबस्टेशन पर ट्रांसमिशन लाइन के अंत में होता है? (In which group of transformers, the 3 phase transformer is at the end of the transmission line at the substation for the working connection?)

24 / 50

24. परिणामित्र का कार्य सिद्धान्त निम्न पर निर्भर करता है- ( (The working principle of the transformer depends on the following- ()

25 / 50

25. ट्रांसफर्मर की  प्राथनिक व द्वितीयक वाइन्डिंग के बीच हमेशा- (There is always a gap between the primary and secondary windings of the transformer.)

26 / 50

26. सिलिकन इस्पात से बने क्रोड में- (In the core made of silicon steel- )

27 / 50

27. समान क्षमता के लिए शैल प्रकार के ट्रांसफर्मर  में, क्रोड प्रकार ट्रांसफर्मर की अपेक्षा........- (For the same capacity, a shell type transformer has........)

28 / 50

28. एक ट्रांसफर्मर में शून्य भार धारा पूर्ण भार धारा की (Zero load current in a transformer is equivalent to full load current.)

29 / 50

29. एक वितरण परिणामित्र की उच्चतम दक्षता निम्नलिखित भार पर प्राप्त होती है- (The highest efficiency of a distribution transformer is achieved at the following loads:)

30 / 50

30. निम्नलिखित में से कौन सा परिणामित्र जनता की मांग के अनुसार स्थापित किया जाता है- (Which of the following transformers is installed according to public demand?)

31 / 50

31. वायु प्रवाह के द्वारा कौन सा ट्रांसफर्मर ठण्डा होता है। (Which transformer is cooled by air flow?)

32 / 50

32. पावर ट्रांसफर्मर को ठण्डा करने की कौन-सी विधि सामान्य है (Which method of cooling a power transformer is common?)

33 / 50

33. स्काट संयोजन का प्रयोग......... परिवर्तित करने के लिए किया जाता है। (Scott Connection is used for converting........)

34 / 50

34. ट्रांसफार्मर रेटिंग........मे होती है (Transformer rating is in…)

35 / 50

35. ट्रांसफार्मर के ब्रीथर का कार्य है (The function of breather of transformer is)

36 / 50

36. किस प्रकार का ट्रांसफार्मर की सेकेन्डरी वाइन्डिंग को आइसोलेट नहीं करता है? (Which type of transformer does not isolate its secondary winding?)

37 / 50

37. एक ट्रांसफार्मर की 'ALL DAY' क्षमता की गणना के लिए पूरे दिन की दौरान खपत बिजली उत्पादन की इकाई क्या है। (What is the unit of power generation consumed during the whole day to calculate 'ALL DAY' capacity of a transformer?)

38 / 50

38. स्काट संयोजन में टीजर ट्रांसफार्मर में .......पर टेपिंग निकाली जाती है। (In Scott connection, the tapping is removed at _______ in the teaser transformer.)

39 / 50

39. स्काट संयोजन में न्यूट्रल बिन्दु टीजर वाइडिंग को... के अनुपात में बांटता है। (In the Scott combination the neutral point divides the teaser widening in the ratio of... )

40 / 50

40. एक ट्रांसफार्मर के पूर्ण भार पर कापर लॉस 1600 W है, इसस ट्रांसफार्मर के 75% भार पर कापर लॉस होंगे (The copper loss at full load of a transformer is 1600 W, hence the copper loss at 75% load of the transformer will be)

41 / 50

41. वितरण ट्रांसफार्मर इस प्रकार डिजाईन किये जाते हैं कि लोह हानियाँ कम से कम रखी जा सकें क्योंकि (Distribution transformers are designed in such a way that iron losses can be kept to a minimum because)

42 / 50

42. कन्जरवेटर होता है- (A conservator is-)

43 / 50

43. ट्रांसफार्मर में निम्न में से कौन सा भाग सबसे अधिक गर्म होता है? (Which of the following parts in a transformer is the hottest?)

44 / 50

44. छोटे वितरण ट्रांसफार्मर में निम्नलिखित सुरक्षा में से कौन सा उपयोग नही होता है (Which of the following protection is not used in small distribution transformers)

45 / 50

45. एक बड़े ट्रांसफार्मर की दक्षता लगभग होती है- (The efficiency of a large transformer is approximately-)

46 / 50

46. ट्रांसफार्मर मे ओपन सर्किट टेस्ट करने के लिए सामान्यतया.. को शार्ट सर्किट किया जाता है। (To perform open circuit test in a transformer, generally... is short circuited)

47 / 50

47. ट्रांसफार्मर मे ओपन सर्किट टेस्ट करते समय हमेशा....... वाइन्डिंग में सप्लाई दी जाती है (While conducting open circuit test on transformer, supply is always given in the winding.)

48 / 50

48. ट्रांसफार्मर मे ओपन सर्किट टेस्ट से. ..ज्ञात कर सकते हैं। (From the open circuit test in the derivation... can be known.)

49 / 50

49. जब ट्रांसफार्मर पर भार बढ़ाया जाता है तो भंवर धारा........ (When the load on the transformer is increased then the eddy current...)

50 / 50

50. ट्रांसफार्मर में भँवर धारा हानियाँ. ..के. समानुपाती होती हैं। (Eddy current losses in transformer. ..Of. Are proportional.)

Your score is

The average score is 27%

0%

ITI Electrician NCVT Mock Test - Transformer for ncvt online exam

Mock Test - ट्रांसफर्मर (Transformer) Q51-100

कुल प्रश्न - 50

समय - 60 Min

1 / 11

एक ट्रांसफार्मर के पूर्ण भार पर लोह हानियाँ 100 वॉट है, इसकेआधे भार पर लोह हानियाँ होगी- (The iron losses of a transformer at full load are 100 watts, at half its load the iron losses will be-)

2 / 11

एक बड़े ट्रांसफार्मर की दक्षता लगभग होती है- (The efficiency of a large transformer is approximately-)

3 / 11

एक डिस्ट्रिब्यिशन ट्रांसफार्मर की पूर्ण दिवस दक्षता , व्यावसायिक दक्षता  से...........होती है। (All day efficiency of a distribution type transformer is ……….. commercial efficiency.)

4 / 11

सामान्यतया 5 kVA तक की क्षमता वाले परिणामित्र..... होते हैं। (Generally, transformers with capacity up to 5 kVA are... )

5 / 11

एक ऑटो ट्रांसफार्मर में प्राइमरी व सैकेण्ड्री वाइडिंग.........से जुडी होती हैं। (In an auto transformer the primary and secondary windings are connected to...)

6 / 11

ट्रांसफार्मर क्रोड में उपयोग होने वाली क्रोड ........की होती है- (The core used in transformer core is made of-)

7 / 11

ट्रांसफार्मर में लघु परिपथ परीक्षण (Short Circuit Test) से ज्ञात कर सकते हैं- (Through short circuit test in transformer, we can find out-)

8 / 11

एक सामान्य दो वाइन्डिंग वाला ट्रांसफार्मर अपनी उच्चतम दक्षता पर कार्य कर सकता है जब इसमें... (A typical two-winding transformer can operate at its highest efficiency when it has...)

9 / 11

ट्रांसफार्मर में लीकेज फ्लक्स......... (Leakage flux in transformer........)

10 / 11

ट्रांसफार्मर की पूर्ण दिवस दक्षता को... .भी कहते हैं। (The full day efficiency of the transformer is also called….)

11 / 11

एक 50 kVA ट्रांसफार्मर के पूर्ण भार ताम्र हानियाँ 800 वाट व लोह हानियाँ 500 वाट हैं, यदि पूर्ण भार पर शक्ति गुणांक 0.8 पश्चगामी हो तो ट्रांसफार्मर की दक्षता होगी- (The full load copper losses of a 50 kVA transformer are 800 watts and iron losses are 500 watts. If the power factor at full load is 0.8 lagging, then the efficiency of the transformer will be-)

Your score is

The average score is 41%

0%

Important Links -

Leave a Comment

Your email address will not be published. Required fields are marked *