250+ Cell and Battery MCQs for ITI Electrician Competitive Exam

Nimi Mock test -cell and battery for iti electrician ncvt online exam

250+ Cell and Battery MCQs  ITI  Electrician के उन छात्रों के लिए एक महत्वपूर्ण संसाधन है जो विभिन्न सरकारी और निजी क्षेत्र की परीक्षाओं की तैयारी कर रहे हैं। इसमें इलेक्ट्रिशियन ट्रेड से संबंधित सभी जरूरी विषयों जैसे कि बेसिक इलेक्ट्रिसिटी, वायरिंग, मोटर, इंस्ट्रूमेंटेशन, और सेफ्टी से जुड़े बहुविकल्पीय प्रश्न (MCQs) शामिल हैं। यह टेस्ट सीरीज़ न केवल ज्ञान को मजबूत करती है, बल्कि परीक्षा में समय प्रबंधन और प्रश्न हल करने की क्षमता को भी बढ़ाती है। नियमित अभ्यास से उम्मीदवार अपनी सफलता की संभावनाओं को कई गुना बढ़ा सकते हैं।

ITI Electrician MCQ - Cell and Battery

Nimi Mock test -cell and battery for iti electrician ncvt online exam

Mock Test -Cell and Battery

प्रश्न : 1-50 (Part 1)

समय : 30 Min

1 / 20

1. बिजली घरों में किस भण्डारण बैटरी का सामान्यतया प्रयोग किया जाता है? (Which storage battery is generally used in power houses?)

2 / 20

2. एक 120Ah क्षमता वाली बैटरी कितनी अवधि तक 84 धारा दे सकती है? (For how long can a 120Ah capacity battery deliver 84 current? )

3 / 20

3. लेड एसिड बैट्री में बकलिंग दोष का कारण है- (The cause of buckling defect in lead acid battery is-)

4 / 20

4. दो सैलों को बैटरी बनाने के लिए श्रृंखला में जोड़ा गया है, उनका आन्तरिक प्रतिरोधक 0.1 ओहम है। बैटरी का आन्तरिक प्रतिरोधक होगा (Two cells are connected in series to form a battery, their internal resistance is 0.1 Ohm. The internal resistance of the battery will be)

5 / 20

5. पूर्णतः चार्ज सिक्का अम्ल बैटरी की अवस्था को इसके द्वारा मापा जा सकता है: (The state of a fully charged coin acid battery can be measured by:)

6 / 20

6. अम्ल (Acid) के आपेक्षिक घनत्व इसकी सहायता में जाँचा जा सकता है (The relative density of an acid can be checked with the help of)

7 / 20

7. एक 120Ah क्षमता वाली बैटरी कितनी अवधि तक 8A धारा दे सकती है? (For how long can a 120Ah capacity battery deliver 8A current? )

8 / 20

8. चार्जिंग के दौरान लेड एसिड सेल के वेन्ट प्लग को खुला रखने का कारण क्या है- (What is the reason for keeping the vent plug of lead acid cell open during charging?)

9 / 20

9. मूविंग क्वॉइल विद्युत यंत्र में डैम्पिंग की जाती है- (Damping is done in moving coil electrical equipment-)

10 / 20

10. जब बैट्री को बहुत कम दर अर्थात् सामान्य दर से 2 से 3% तक लम्बी अवधि के लिए चार्ज किया जाता है तो इसे कहेंगे- (When the battery is charged at a very low rate i.e. 2 to 3% of the normal rate for a long period then it is called-)

11 / 20

11. ताँबे की परत चढ़ाने के लिए उपयोग होने वाला पदार्थ है। (It is a substance used for coating copper.)

12 / 20

12. सेकंडरी सेल की क्षमता की इकाई है (The unit of capacity of secondary cell is)

13 / 20

13. . सिक्का अम्ल बैटरी की आयु होती है: (, The lifespan of coin acid battery is: )

14 / 20

14. किस उपकरण का उपयोग वोल्टेज को माप करके बैटरी की चार्जिंग स्थिति को जांचने के लिए किया जाता है। (Which instrument is used to check the charging status of a battery by measuring the voltage. )

15 / 20

15. लीड एसिड सेल के धनात्मक प्लेट में प्रयुक्त सक्रिय सामग्री होता है- (The active material used in the positive plate of lead acid cell is- )

16 / 20

16. बैट्री की क्षमता व्यक्त की जाती है- (Battery capacity is expressed as- )

17 / 20

17. . द्वितीयक सेलों की ऊर्जा प्रायः से नवीनीकरण किया जाता (, The energy of secondary cells is usually renewed by )

18 / 20

18. सैकण्डरी विद्युत यंत्र होते हैं- (Secondary electrical devices are-)

19 / 20

19. इलैक्ट्रोप्लेटिंग इनमें से किस पर होती है? (Electroplating is done on which of the following?)

20 / 20

20. लिथियम सेल में पॉजिटिव इलेक्ट्रोड के रूप में प्रयुक्त सामग्री है- (The material used as positive electrode in lithium cell is- )

Your score is

The average score is 65%

0%

Nimi Mock test -cell and battery for iti electrician ncvt online exam

Mock Test -Cell and Battery

प्रश्न : 101-150 (Part 1)

समय : 30 Min

1 / 20

1. बैटरी की वाट आवर एफिशियंसी होती है : (The watt hour efficiency of a battery is:)

2 / 20

2. प्रत्येक सेल का विद्युत वाहक बल 2 वोल्ट है और धारा क्षमता एक एम्पियर है यदि आपके पास 24 सेल है और 12 वोल्ट पर 4 एम्पियर धारा लेने के लिए सेलों को किस प्रकार जोडेंगे। (The emf of each cell is 2 volts and the current capacity is one ampere if you have 24 cells and how will you connect the cells to get 4 amps of current at 12 volts.)

3 / 20

3. बैटरी की वाट आवर एफिशियंसी ... होती है : (The watt hour efficiency of a battery is:)

4 / 20

4. किसी इलैक्ट्रोड पर युक्त आयनों की संहति (mass) उस करंट की मात्रा के समानुपाती होती है जो इलैक्ट्रोलाइट द्वारा बहकर गुजरती है। यह कथन किस नियम से संबंधित है? (The mass of ions present at an electrode is proportional to the amount of current that passes through the electrolyte. Which rule does this statement relate to?)

5 / 20

5. लैड एसिड बैटरी को चार्ज करते समय निम्न में कौन-सा गुण बढ़ता है? (Which of the following properties increases while charging a lead acid battery? )

6 / 20

6. लैड एसिड बैट्री की दशा में, डिस्चार्ज के समय (In case of lead acid battery, at the time of discharge)

7 / 20

7. एक बैट्री स्त्रोत की खुली परिपथ वोल्टता का मान 10 V है जब इसको भार से जोडा गया तो 50 mA धारा प्रवाहित होने पर टर्मिनल वोल्टता 5V रह गई। सेल की आन्तरिक प्रतिरोध का मान होगा- (The value of open circuit voltage of a battery source is 10 V. When it was connected to the load, the terminal voltage remained 5V when 50 mA current flowed. The value of internal resistance of the cell will be-)

8 / 20

8. लिथियम सेल में पॉजिटिव इलेक्ट्रोड के रूप में प्रयुक्त सामग्री . है- ( Material used as positive electrode in lithium cell. Is- )

9 / 20

9. पूरी तरह से चार्ज लैड एसिड बेटरी का पता लगाने के लिए जाँच करेंगे। (Will check to detect a fully charged lead acid battery. )

10 / 20

10. लेड एसिड बैटरी की प्लेटें... की बनी होती हैं। (The plates of a lead acid battery are made of...)

11 / 20

11. स्टोरेज बैटरी की ई०एम०एफ० निर्भर करती है। (The emf of the storage battery depends. )

12 / 20

12. 1.5 वोल्ट और 8Ah रेटिंग के चार सैल बैट्री से समान्तर क्रम से जोड़े जाते हैं तो बैटरी की वोल्टेज रेटिंग कितनी होगी ? ( If four cells of 1.5 volt and 8Ah rating are connected to the battery in parallel, then what will be the voltage rating of the battery? )

13 / 20

13. प्राथमिक सेल में स्थानिय क्रिया रोकने के लिए जिंक पर पारा की परत चढाई जाती है, इस क्रिया को कहते है- (To stop the local reaction in the primary cell, a layer of mercury is coated on zinc, this process is called-)

14 / 20

14. लैंड-एसिड बैट्री के उत्पादक अधिक से अधिक कितने समय तक बैट्री को डिस्चार्ज अवस्था में रखने की सलाह देते हैं : (A) 24 घण्टे (B) एक सप्ताह (C) एक महीना। (D) एक घण्टा। (The maximum period for which manufacturers of lead-acid batteries recommend keeping the battery in discharged state is: (A) 24 hours (B) One week (C) One month. (D) One hour.)

15 / 20

15. जब एक कपैस्टर लोड में करंट प्रवाह करता है तो करंट तथा वोल्टेज (When a capacitor flows current into the load, the current and voltage)

16 / 20

16. लैंड-एसिड बैटरियों में सेडीमेंटेशन (Sedimentation) होने के कारण (Causes of Sedimentation in Land-Acid Batteries )

17 / 20

17. लेड एसिड बैटरी में प्रयुक्त विद्युत अपघट्य है- ( The electrolyte used in lead acid battery is-)

18 / 20

18. लैंड-एसिड बैटरियों में सेडीमेंटेशन (Sedimentation) होने के कारण (Causes of Sedimentation in Land-Acid Batteries )

19 / 20

19. एक पूरी तरह से चार्ज लैड एसिड बैट्री में पॉजिटिव निगेटिव प्लेटों पर एक्टिव मेटेरियल.... होगा। (A fully charged lead acid battery will have active material on the positive negative plates. )

20 / 20

20. यदि बैटरी के पोजेटिव और नेगेटिव टर्मिनलों पर कोई चिह्न नहीं है तब आप बैटरी के टर्मिनलों की किस प्रकार पहचान करेंगे ? (If there is no marking on the positive and negative terminals of the battery, then how will you identify the terminals of the battery? )

Your score is

The average score is 83%

0%

Nimi Mock test -cell and battery for iti electrician ncvt online exam

Mock Test -Cell and Battery

प्रश्न : 101-150 (Part 2)

समय : 30 Min

1 / 14

1. एक 120 Ah क्षमता बैटरी 8A की धारा निम्न घंटे तक प्रवाहित करनी चाहिए (A 120 Ah capacity battery should flow a current of 8A for the following hours )

2 / 14

2. सामान्य रूप से बैटरी के डिब्बे के बने होते हैं। (Usually made of battery cans. )

3 / 14

3. बैट्री के टर्मिनल पोस्ट से आक्साइड की परत साफ करने के लिए उपयोग करना चाहिये (Should be used to clean the oxide layer from the terminal posts of the battery.)

4 / 14

4. . एक कार्बनिक जिंक सैल जिसका आन्तरिक प्रतिरोध 0.5 ओह्य है तथा बाह्य प्रतिरोध 19.5 ओह्म होने की स्थिति में वि.वा. बल का मान 1.5 वोल्ट होता है तो सैल द्वारा परिपथ में प्रवाहित धारा का मान होता है? (, In the case of an organic zinc cell whose internal resistance is 0.5 Ohm and external resistance is 19.5 Ohm. If the value of force is 1.5 volts, then what is the value of the current flowing in the circuit through the cell? )

5 / 14

5. डिस्चार्ज स्थिति में लैड एसिड सैल को अधिक समय तक रखने पर सैल कौनसा प्रभाव प्रदर्शित करेगा? ( What effect will the cell exhibit if a lead acid cell is kept in discharged state for a long time? )

6 / 14

6. निम्न में से एक लेड एसिड बैट्री में ऋणात्मक प्लेट का पदार्थ होता है ?

7 / 14

7. एक धन आवेशित आयन कई बार.... ..के नाम से भी जाना जाता है। (A positively charged ion is sometimes also known as….. )

8 / 14

8. इलैक्ट्रोलाइसिस प्रक्रिया में की आवश्यकता होती है- (Electrolysis process requires- )

9 / 14

9. निम्न में से एक लेड एसिड बैट्री में ऋणात्मक प्लेट का पदार्थ होता है ? ( Which of the following is the material of negative plate in lead acid battery? )

10 / 14

10. KOH और LI (OH) का घोल का उपयोग होता है- (Solution of KOH and LI (OH) is used- )

11 / 14

11. यदि दो समान धातु के इलैक्ट्रोड इलैक्ट्रोलाइट में डुबो दिये जायें तो सेल में...... (If two electrodes of similar metal are immersed in electrolyte, then in the cell...)

12 / 14

12. सेल का आन्तरिक प्रतिरोध को नियन्त्रित करता है। (Controls the internal resistance of the cell.)

13 / 14

13. एक सेल के आन्तरिक प्रतिरोध को क्या होगा यदि सेल को बहुत (What will happen to the internal resistance of a cell if the cell is)

14 / 14

14. यदि बैटरी को अतिआवेशित या निरावेशित उच्च दर पर करे तो क्या (What happens if the battery is overcharged or discharged at a high rate?)

Your score is

The average score is 0%

0%

Nimi Mock test -cell and battery for iti electrician ncvt online exam

Mock Test -Cell and Battery

प्रश्न : 151-200 (Part 1)

समय : 30 Min

1 / 20

1. विद्युत के एक कूलॉम्ब द्वारा इलेक्ट्रोलाइट से मास के तत्व को मुक्त करना कहलाता है........ (The liberation of an element of mass from the electrolyte by one coulomb of electricity is called…….)

2 / 20

2. वह प्राइमरी सेल कौन सा होता है जिसका शेल्फ लाइफ सबसे लम्बा होता है? (Which is the primary cell which has the longest shelf life?)

3 / 20

3. लेड एसिड बैटरी में किस इलेक्टोलाइट का प्रयोग किया जाता है? (Which electrolyte is used in lead acid battery? )

4 / 20

4. चार सेल समान्तर में जुडे हैं और प्रत्येक सेल की रेटिंग 15 वोल्ट और 16 एम्पीयर है। इस बैटरी की 'Ah' रेटिंग क्या है? (Four cells are connected in parallel and each cell is rated at 15 volts and 16 amps. What is the 'Ah' rating of this battery?)

5 / 20

5. जिंक प्लेट में उपस्थित अशुद्धियों के कारण साधारण वाल्टिक सेल में आने वाले दोष का नाम है ? (Jan 2015-NM) (A) ध्रुवीकरण (B) स्थानीय एक्शन (C) सल्फेशन (D) बकलिंग (What is the name of the defect occurring in ordinary voltaic cell due to impurities present in zinc plate? (Jan 2015-NM) (A) Polarization (B) Local Action (C) Sulphation (D) Buckling)

6 / 20

6. जब बैटरी बहुत कम दर पर चार्ज की जाती है तब बैटरी के चार्ज करने की विधि क्या कहलाती है ? (When the battery is charged at a very low rate then what is the method of charging the battery called?)

7 / 20

7. एक कार्बन में जिंक सैल के साथ का 0.5 ohm आन्तरिक प्रतिरोध लगा है और उसकी विद्युत वाहक बल 1.5 वोल्ट 19.5 ohm बाहरी प्रतिरोध भार के साथ लगाया गया है तो करंट की गणना कीजिए एक बहने वाली धारा माइक्रो एम्पियर में बताइए ? (A carbon zinc cell has an internal resistance of 0.5 ohm and its emf is 1.5 volt. If an external resistance of 19.5 ohm is applied along with the load, then calculate the current. Tell the current flowing in micro ampere?)

8 / 20

8. जब बैटरी बहुत कम दर पर चार्ज की जाती है तब बैटरी के चार्ज करने की विधि क्या कहलाती है ? (When the battery is charged at a very low rate then what is the method of charging the battery called?)

9 / 20

9. सेकंडरी सेल की क्षमता की इकाई है- (The unit of capacity of secondary cell is-)

10 / 20

10. vकिस उपकरण का उपयोग वोल्टेज को माप करके बैटरी की चार्जिंग स्थिति को जांचने के लिए किया जाता है- (Which instrument is used to check the charging status of the battery by measuring the voltage?)

11 / 20

11. जब बैटरी बहुत कम दर पर चार्ज की जाती है तब बैटरी के चार्ज करने की विधि क्या कहलाती है ? (When the battery is charged at a very low rate then what is the method of charging the battery called?)

12 / 20

12. क्षय को रोकने के लिए लिड एसिड बैटरी के टर्मिनल पर कौन सा पदार्थ लगाया जाता है (Which substance is applied at the terminals of lead acid battery to prevent decay?)

13 / 20

13. लैंड ऐसिड सैल में 'X' द्वारा संकेतिक किये गये भाग का क्या नाम है? (What is the name of the part indicated by 'X' in the acid cell?)

14 / 20

14. लेड एसिड बैटरी में सेपरेटर का उद्देश्य क्या होता है? (What is the purpose of separator in lead acid battery?)

15 / 20

15. यदि लैंड ऐसिड सैल को लम्बे समय तक चार्जन किया जायें तो उसके स्थिति में सैल में क्या दाब उत्पन्न होगा? ( (If a land acid cell is charged for a long time, what pressure will be generated in the cell? ,)

16 / 20

16. इलेक्ट्रोलिसिस प्रोसेस में जमा द्रव्यमान 'M' को गणना करने के लिए सूत्र कौन सा है- (Which is the formula to calculate the mass 'M' deposited in electrolysis process?)

17 / 20

17. सेलों को समानान्तर क्रम में संयोजित करने का क्या उद्देश्य है.......... (What is the purpose of connecting cells in parallel?)

18 / 20

18. जब करेंट इलेक्टोलाइट से पास होता है तब करेंट किस प्रकार का प्रभाव पैदा करेगा ? (What type of effect will the current produce when it passes through the electrolyte?)

19 / 20

19. लीड एसिड सेल के धनात्मक प्लेट में प्रयुक्त सक्रिय सामग्री होता है- (The active material used in the positive plate of lead acid cell is- )

20 / 20

20. चार्जिंग के दौरान लेड एसिड सेल के वेन्ट प्लग को खुला रखने क कारण क्या है- (What is the reason for keeping the vent plug of lead acid cell open during charging? )

Your score is

The average score is 0%

0%

Nimi Mock test -cell and battery for iti electrician ncvt online exam

Mock Test -Cell and Battery

प्रश्न : 151-200 (Part 2)

1 / 11

1. 1.5 वोल्ट और 8Ah रेटिंग के चार सेल बैटरी से समानान्तर क्रम में जोड़े जाते है तो बैटरी की वोल्टेज रेटिंग कितनी होगी? (If four cells of 1.5 Volt and 8Ah rating are connected in parallel to the battery, then what will be the voltage rating of the battery?)

2 / 11

2. पूरी तरह से डिस्चार्ज और लंबे समय से रखे गए बैटरी को चार्ज करने के लिए किस प्रकार पद्धति का इस्तेमाल होता है? (What method is used to charge a completely discharged and long stored battery? )

3 / 11

3. सल्फेशन को रोकने के लिए टर्मिनल पोस्ट पर कौन सी सामग्री लगाई जाती है? (Which material is applied on terminal post to prevent sulfation? )

4 / 11

4. लेड एसिड बैटरी में प्रयुक्त विद्युत अपघट्य है. (Lead acid is an electrolyte used in batteries.)

5 / 11

5. R in= 0.2 Om वाले प्रत्येक 2V के पाँच सेलो को 14 प्रतिरोध के एक भार के लिए श्रेणी में जोड़े जाते है। परिपथ में बहने वाली धारा होगी (Five cells of 2V each having R in = 0.2 Ohm are connected in series to a load of 14 resistance. The current flowing in the circuit will be)

6 / 11

6. क्या होता है जब चार्जिंग के दौरान चार्जर का बैटरी के ध्रुवता को विपरित क्रम में जोड़ा जाता है? (What happens when the polarity of the charger is connected to the battery in reverse order during charging? )

7 / 11

7. प्रत्येक e.m.f. 2V के पाँच सेलों और आतंरिक प्रतिरोध 0.5Om को श्रेणी में जोड़े जाते है। परिणामी बैटरी होगी- (Each e.m.f. Five cells of 2V and internal resistance 0.5Ohm are connected in series. The resulting battery will be-)

8 / 11

8. बैटरी की क्षमता व्यक्त की जाती है.......... (Battery capacity is expressed as...)

9 / 11

9. लीड एसिढ बैटरी के पूरी तरह से डिस्चार्ज स्थिति के बाद कितना न्यूनतम डिस्चार्ज वोल्टेज देना चाहिए (What is the minimum discharge voltage that a lead acid battery should provide after its fully discharged state?)

10 / 11

10. लेड एसिड बैटरी में बकलिंग दोष का कारण है........ (The cause of buckling defect in lead acid battery is...)

11 / 11

11. लिथियम सेल में पाजिटिव इलेक्ट्रोड के रूप में प्रयुक्त सामग्री है (The material used as positive electrode in lithium cell is)

Your score is

The average score is 0%

0%

Important Links -

Leave a Comment

Your email address will not be published. Required fields are marked *