250+ Transformer MCQs for ITI Electrician Competitive Tests

ITI Electrician NCVT Mock Test - Transformer for ncvt online exam

“250+ DC Generator MCQs” ITI Electrician के उन विद्यार्थियों के लिए एक अत्यंत उपयोगी अभ्यास सामग्री है जो NCVT परीक्षा के बाद विभिन्न सरकारी एवं निजी क्षेत्र की तकनीकी परीक्षाओं—जैसे रेलवे, बिजली बोर्ड, BHEL, GAIL, ONGC, NTPC, आदि—की तैयारी कर रहे हैं।

ITI Electrician MCQ

250+ Transformer MCQs  ITI  Electrician के उन छात्रों के लिए एक महत्वपूर्ण संसाधन है जो विभिन्न सरकारी और निजी क्षेत्र की परीक्षाओं की तैयारी कर रहे हैं। इसमें इलेक्ट्रिशियन ट्रेड से संबंधित सभी जरूरी विषयों जैसे कि बेसिक इलेक्ट्रिसिटी, वायरिंग, मोटर, इंस्ट्रूमेंटेशन, और सेफ्टी से जुड़े बहुविकल्पीय प्रश्न (MCQs) शामिल हैं। यह टेस्ट सीरीज़ न केवल ज्ञान को मजबूत करती है, बल्कि परीक्षा में समय प्रबंधन और प्रश्न हल करने की क्षमता को भी बढ़ाती है। नियमित अभ्यास से उम्मीदवार अपनी सफलता की संभावनाओं को कई गुना बढ़ा सकते हैं।

यदि आप केवल ITI परीक्षा की तैयारी कर रहे हैं, तो सबसे पहले यहां क्लिक करके NIMI Mock Test से अभ्यास करें, क्योंकि ITI की परीक्षाओं में अधिकांश प्रश्न इन्हीं से लिए जाते हैं।

📘 नियमित अभ्यास करने से अभ्यर्थी अपनी सफलता की संभावना को कई गुना बढ़ा सकते हैं।

NCVT Mock Test - Transformer

Nimi mock Test -Transformer

Mix ट्रांसफर्मर (Transformer) (Q1-50) Part 1

1 / 20

एक एकल कला (single phase) परिणामित्र की क्रोड में स्थापित फ्लक्स होता है- (The flux established in the core of a single phase transformer is-)

2 / 20

एक आदर्श परिणामित्र ऐसा परिणामित्र होता है जिसमें (An ideal transformer is a transformer in which)

3 / 20

एक ट्रांसफार्मर बहुत कम आवृत्ति पर बड़ी मुश्किल में परिचालित होता है क्योंकि- (A transformer operates with great difficulty at very low frequency because-)

4 / 20

यदि एक शक्ति ट्रांसफार्मर बहुत अधिक आवृत्ति पर परिचालित होता है तो (If a power transformer operates at a very high frequency then)

5 / 20

ट्रांसफार्मर की प्राथमिक में ताँबा की मात्रा द्वितीयक से ..होती है (The amount of copper in the primary of the transformer is greater than that in the secondary.)

6 / 20

निम्न चित्र में शून्य भार धारा। है- (Zero load current in the following figure. Is-)

7 / 20

ट्रांसफार्मर की क्रोड को पट्टलित बनाने से कम की जा सकेगी है (This can be reduced by making the core of the transformer laminated. )

8 / 20

LED लैम्प में एक शक्ति कारक होते हैं- (LED lamp has a power factor-)

9 / 20

परिणामित्र में. ..परिवर्तन करने का गुण नहीं होता है। (In the transformer. ..does not have the ability to change.)

10 / 20

कम पावर कारक (low power factor)

11 / 20

परिणामित्र कार्य करता है- (Transformer works-)

12 / 20

एक 2000/200 V, 50 Hz, 20 kVA आदर्श परिणामित्र की द्वितीयक कुण्डलन में 66 वर्त है, इसकी प्राथमिक कुण्डलन में वर्तों की संख्या होगी...... (A 2000/200 V, 50 Hz, 20 kVA ideal transformer has 66 turns in its secondary winding, the number of turns in its primary winding will be......)

13 / 20

परिणामित्र विद्युत ऊर्जा को एक परिपथ से दूसरे परिपथ में स्थानान्तरित करता है जो कि सामान्यतया.. (Transformer transfers electrical energy from one circuit to another which is generally..)

14 / 20

एक ट्रांसफार्मर 230/2300 V शून्य भार धारा 6.5 A पर 187 वाट शक्ति हानि करता है, यदि प्राथमिक कुण्डलन का प्रतिरोध 0.062हो तो हानियाँ क्या होगी (A transformer 230/2300 V loses 187 watts of power at no load current 6.5 A, what will be the losses if the resistance of the primary coil is 0.062)

15 / 20

परिणामित्र में लोह क्रोड का उपयोग....के लिए किया जाता है। (Iron core in transformer is used for….)

16 / 20

आयरन बॉक्स के हैंडल के बने होते हैं। (Made of iron box handles.)

17 / 20

बडे ट्रांसफार्मरों में क्रोड का आकार वृत्तिय अनुप्रस्थ क्षेत्र में बनाया जाता है ताकि. .. कम किये जा सकें। (In large transformers the core is shaped in a circular cross-sectional area so that ..can be reduced.)

18 / 20

निम्न चित्र.......... में एक वास्तविक ट्रांसफार्मर भार से जुड़ा दिखाया गया है धारा।', और।, होगी- (The following figure shows the current connected to an actual transformer load.', and', will be-)

19 / 20

दो चिजें जो ट्रांसफार्मर की प्राथमिक व द्वितीयकं दोनों में समान है- (Two things which are common in both primary and secondary of transformer-)

20 / 20

ट्रांसफार्मर की प्राथमिक व द्वितीयक कुण्डलन एक दूसरे के उपर कुण्डलित की जाती है ताकि. ..कको कम किया जा सके। (The primary and secondary windings of the transformer are wound on top of each other so that. ..which can be reduced.)

Your score is

The average score is 52%

0%

Nimi mock Test -Transformer

Mix ट्रांसफर्मर (Transformer) (Q1-50) Part 2

1 / 20

ट्रांसफार्मर क्रोड में उपयोग होने वाली क्रोड होती है- (The core used in transformer core is-)

2 / 20

एक ऑटो ट्रांसफार्मर में प्राइमरी व सैकेण्ड्री वाइडिंग.........से जुडी होती हैं। (In an auto transformer the primary and secondary windings are connected to...)

3 / 20

जब ट्रांसफार्मर की द्वितीयक लघु पथित होती है तो प्राथमिक प्रेरकत्व .......... (When the secondary circuit of the transformer is short circuited then the primary inductance…………)

4 / 20

एक वितरण प्रकार के ट्रांसफार्मर की पूर्ण दिवस दक्षता (All day Efficiency) व्यावसायिक दक्षता (Commercial Efficiency) से...........होती है। (All day efficiency of a distribution type transformer is ……….. commercial efficiency.)

5 / 20

ट्रांसफार्मर में क्षरण फ्लक्स (Leakage flux)............. (Leakage flux in transformer…………..)

6 / 20

ट्रांसफार्मर की पूर्ण दिवस दक्षता को... .भी कहते हैं। (The full day efficiency of the transformer is also called….)

7 / 20

ट्रांसफार्मर में लघु परिपथ परीक्षण (Short Circuit Test) से ज्ञात कर सकते हैं- (Through short circuit test in transformer, we can find out-)

8 / 20

ट्रांसफार्मर पर खुला परिपथ परीक्षण करते समय हमेशा....... कुण्डलन में सप्लाई दी जाती है (While conducting open circuit test on transformer, supply is always given in the winding.)

9 / 20

एक बड़े ट्रांसफार्मर की दक्षता लगभग होती है- (The efficiency of a large transformer is approximately-)

10 / 20

ट्रांसफार्मर में भँवर धारा हानियाँ. ..के. समानुपाती होती हैं। (Eddy current losses in transformer. ..Of. Are proportional.)

11 / 20

सामान्यतया 5 kVA तक की क्षमता वाले परिणामित्र..... होते हैं। (Generally, transformers with capacity up to 5 kVA are... )

12 / 20

हम खुला परिपथ परीक्षण से. ..ज्ञात कर सकते हैं। (By open circuit testing. ..can know.)vvv

13 / 20

एक अग्रगामी (Leading) शक्ति गुणंक वाले भार पर ट्रांसफार्मर की द्वितीयक पूर्ण भार वोल्टता शून्य भार वोल्टता से........होती है। (At a load with a leading power factor, the secondary full load voltage of the transformer is ..................... than the no load voltage.)

14 / 20

एक ट्रांसफार्मर के पूर्ण भार पर लोह हानियाँ 100 वॉट है, इसकेआधे पर लोह हानियाँ होगी- (Iron losses at full load of a transformer are 100 watts, iron losses at half of this will be- )

15 / 20

ट्रांसफार्मर पर लघु परिपथ परीक्षण करने के लिए सामान्यतया.. को लघु पथ किया जाता है। (To conduct short circuit test on a transformer, generally... is shorted.)

16 / 20

एक ट्रांसफार्मर में तापमान में वृद्धि के समानुपाती होती हैं। (are proportional to the increase in temperature in a transformer.)

17 / 20

एक आइसोलेशन ट्रांसफार्मर की प्राथमिक व द्वितीयक कुण्डलन में टर्न अनुपात होता है- (The turn ratio in the primary and secondary windings of an isolation transformer is-)

18 / 20

एक सामान्य दो कुण्डलन वाला ट्रांसफार्मर अपनी उच्चतम दक्षता पर कार्य कर सकता है जब इसमें... (A typical two winding transformer can operate at its highest efficiency when it has... )

19 / 20

एक 50 kVA ट्रांसफार्मर के पूर्ण भार ताम्र हानियाँ 800 वाट व लोह हानियाँ 500 वाट हैं, यदि पूर्ण भार पर शक्ति गुणांक 0.8 पश्चगामी हो तो ट्रांसफार्मर की दक्षता होगी- (The full load copper losses of a 50 kVA transformer are 800 watts and iron losses are 500 watts. If the power factor at full load is 0.8 lagging, then the efficiency of the transformer will be-)

20 / 20

जब ट्रांसफार्मर पर भार बढ़ाया जाता है तो भंवर धारा........ (When the load on the transformer is increased then the eddy current...)

Your score is

The average score is 0%

0%

Nimi mock Test -Transformer

Mix ट्रांसफर्मर (Transformer) (Q1-50) Part 3

1 / 20

एक ऑटो ट्रांसफार्मर में प्राइमरी व सैकेण्ड्री वाइडिंग.........से जुडी होती हैं। (In an auto transformer the primary and secondary windings are connected to...)

2 / 20

दो चिजें जो ट्रांसफार्मर की प्राथमिक व द्वितीयकं दोनों में समान है- (Two things which are common in both primary and secondary of transformer-)

3 / 20

यदि एक शक्ति ट्रांसफार्मर बहुत अधिक आवृत्ति पर परिचालित होता है तो (If a power transformer operates at a very high frequency then)

4 / 20

LED लैम्प में एक शक्ति कारक होते हैं- (LED lamp has a power factor-)

5 / 20

छोटे वितरण ट्रांसफार्मर में निम्नलिखित सुरक्षा में से कौन सा उपयोग नहीहोता है (Which of the following protection is not used in small distribution transformers)

6 / 20

एक एकल कला (single phase) परिणामित्र की क्रोड में स्थापित फ्लक्स होता है- (The flux established in the core of a single phase transformer is-)

7 / 20

ट्रांसफार्मर में क्षरण फ्लक्स (Leakage flux)............. (Leakage flux in transformer…………..)

8 / 20

स्काट संयोजन में टीजर ट्रांसफार्मर में पर टेपिंग निकाली जाती है। (In Scott connection, taping is taken out in the teaser transformer. )

9 / 20

वितरण ट्रांसफार्मर इस प्रकार डिजाईन किये जाते हैं कि लोह हानियाँ कम से कम रखी जा सकें क्योंकि (Distribution transformers are designed in such a way that iron losses can be kept to a minimum because)

10 / 20

ट्रांसफार्मर में निम्न में से कौन सा भाग सबसे अधिक गर्म होता है? (Which of the following parts in a transformer is the hottest?)

11 / 20

ट्रांसफार्मर पर लघु परिपथ परीक्षण करने के लिए सामान्यतया.. को लघु पथ किया जाता है। (To conduct short circuit test on a transformer, generally... is shorted.)

12 / 20

बडे ट्रांसफार्मरों में क्रोड का आकार वृत्तिय अनुप्रस्थ क्षेत्र में बनाया जाता है ताकि. .. कम किये जा सकें। (In large transformers the core is shaped in a circular cross-sectional area so that ..can be reduced.)

13 / 20

एक ट्रांसफार्मर के क्रोड व ताम्र हानियों निम्न प्रकार दर्शायी गई है, किस भार पर ट्रांसफार्मर की दक्षता उच्चतम होगीभार क्रोड हानियाँ ताम्र हानियाँ (The core and copper losses of a transformer are shown as follows. At what load the efficiency of the transformer will be highest? Load Core Losses Copper Losses)c

14 / 20

एक बड़े ट्रांसफार्मर की दक्षता लगभग होती है- (The efficiency of a large transformer is approximately-)

15 / 20

ट्रांसफार्मर पर खुला परिपथ परीक्षण करते समय हमेशा....... कुण्डलन में सप्लाई दी जाती है (While conducting open circuit test on transformer, supply is always given in the winding.)

16 / 20

एक ट्रांसफार्मर के पूर्ण भार पर कापर लॉस 1600 W है, इसस ट्रांसफार्मर के 75% भार पर कापर लॉस होंगे (The copper loss at full load of a transformer is 1600 W, hence the copper loss at 75% load of the transformer will be)

17 / 20

कन्जरवेटर होता है- (A conservator is-)

18 / 20

स्काट संयोजन में न्यूट्रल बिन्दु टीजर वाइडिंग को... के अनुपात में बांटता है। (In the Scott combination the neutral point divides the teaser widening in the ratio of... )

19 / 20

वितरण ट्रांसफार्मर इस प्रकार डिजाईन किये जाते हैं कि लोह हानियाँ कम से कम रखी जा सकें क्योंकि (Distribution transformers are designed in such a way that iron losses can be kept to a minimum because)

20 / 20

एक अग्रगामी (Leading) शक्ति गुणंक वाले भार पर ट्रांसफार्मर की द्वितीयक पूर्ण भार वोल्टता शून्य भार वोल्टता से........होती है। (At a load with a leading power factor, the secondary full load voltage of the transformer is ..................... than the no load voltage.)

Your score is

The average score is 0%

0%

Nimi mock Test -Transformer

Mix ट्रांसफर्मर (Transformer) (Q51-100) Part 1

1 / 20

एक ट्रांसफार्मर में राहत देने के लिए....... (To provide relief in a transformer...)

2 / 20

एक वितरण परिणामित्र की उच्चतम दक्षता निम्नलिखित भार पर प्राप्त होती है- (The highest efficiency of a distribution transformer is achieved at the following loads:)

3 / 20

वायु प्रवाह के द्वारा कौन सा परिणामित्र ठण्डा होता है। (Which transformer is cooled by air flow?)

4 / 20

ट्रांसफार्मर का मात्रक है (The unit of transformer is)

5 / 20

सिलिकन इस्पात से बने क्रोड में- (In the core made of silicon steel- )

6 / 20

3KVA ट्रांसफार्मर में चकरों की संख्या प्रति वोल्ट 8 है। यदि वोल्टेज 110 वोल्ट है तो उच्च वोल्टेज में चकरों की संख्या क्या है? (The number of turns in a 3KVA transformer is 8 per volt. If the voltage is 110 volts then what is the number of turns in the higher voltage?)

7 / 20

एक परिणामित्र में शून्य भार धारा पूर्ण भार धारा की (Zero load current in a transformer is equivalent to full load current.)

8 / 20

निम्नलिखित में से कौन सा परिणामित्र जनता की मांग के अनुसार स्थापित किया जाता है- (Which of the following transformers is installed according to public demand?)

9 / 20

परिणामित्र की प्राथनिक व द्वितीयक कुण्डलन के बीच हमेशा- (There is always between the primary and secondary windings of the transformer.)

10 / 20

ट्रांसफार्मर का अप वोल्टेज रेग्यूलेशन (V) के प्रतिशत का सूत्र है- (The formula for the percentage of up voltage regulation (V) of the transformer

11 / 20

एक ट्रांसफार्मर की 'ALL DAY' क्षमता की गणना के लिए पूरे दिन की दौरान खपत बिजली उत्पादन की इकाई क्या है। (What is the unit of power generation consumed during the whole day to calculate 'ALL DAY' capacity of a transformer?)

12 / 20

समान क्षमता के लिए शैल प्रकार परिणामित्र में, क्रोड प्रकारपरिणामित्र को अपेक्षा- (In a shell type transformer for the same capacity, the core type transformer requires-)

13 / 20

आधे भार पर कॉपर लौस क्या होगा जब कि पूरे भार पर कॉपर लौस 1600 वाट है? (What will be the copper loss at half load when the copper loss at full load is 1600 watts?)

14 / 20

एक बक बूस्ट परिणामित्र होता है- (A buck boost converter is-)

15 / 20

परिणामित्र का कार्य सिद्धान्त निम्न पर निर्भर करता है- ( (The working principle of the transformer depends on the following- ()

16 / 20

किसी परिणामित्र में प्रति वोल्ट प्राथमिक व द्वितीयक में हमेशा- (In a transformer, per volt in primary and secondary always-)

17 / 20

ट्रांसफार्मर के ब्रीथर का कार्य है (The function of breather of transformer is)

18 / 20

स्काट संयोजन (Scott Connection) का प्रयोग परिवर्तित करने के लिए किया जाता है। (Scott Connection is used for converting.)

19 / 20

शक्ति परिणामित्र को ठण्डा करने की कौन-सी विधि सामान्य है (Which method of cooling a power transformer is common?)

20 / 20

किस प्रकार का ट्रांसफार्मर सेकेन्डरी को आइसोलेट नहीं करता है? (Which type of transformer does not isolate the secondary?)

Your score is

The average score is 0%

0%

Nimi mock Test -Transformer

Mix ट्रांसफर्मर (Transformer) (Q51-100) Part 2

1 / 11

1 के.वी. 240V/120V एकल चरण ट्रांसफार्मर में करंट की गणना लो वोल्टेज साइड में करें- (1 KV Calculate the current in 240V/120V single phase transformer in low voltage side-)

2 / 11

ऑटो ट्रांसफार्मर का एप्लीकेशन क्या है? (What is the application of auto transformer?)

3 / 11

शैल टाइप के लिए छोटे प्रकार का ट्रान्सफार्मर कोर प्रायः इसमें प्रयोग होते है (Small type transformer core for shell type is often used in this.)

4 / 11

अधिकतम क्षमता के दौरान ट्रान्सफॉर्मर का कॉपर लौस है 1000 वॉट तो आइरन लौस क्या होगा? (If the copper loss of the transformer is 1000 watts at maximum capacity then what will be the iron loss?)

5 / 11

जब दो ट्रांसफार्मर समान्तर में काम कर रहे है तो वे किसपर लोड बॉटंगे। के आधार (When two transformers are working in parallel then on whom will they share the load? basis of)

6 / 11

दो वाइन्डिंग ट्रांसफार्मर में, लोड (उत्पादन) साइड के रूप में जाना जाता है. (In a two winding transformer, one is known as the load (production) side.)

7 / 11

कौन सा तरीका ट्रांसफार्मर के समूह में, 3 चरण ट्रांसफार्मर कार्यरत कनेक्शन के लिए सबस्टेशन पर ट्रांसमिशन लाइन के अंत में होता है? (In which group of transformers, the 3 phase transformer is at the end of the transmission line at the substation for the working connection?)

8 / 11

एक विधि जो, ठंडा करने के लिए आम तौर पर अपनायी जाती है, 100 के वी ए तक के कम क्षमता वाले वितरण ट्रांसफार्मर के लिए? (Which method is generally adopted for cooling of low capacity distribution transformers up to 100 KVA?)

9 / 11

0.8 pf पर क्या होगा 1 KVA, 240 V/120V एकल फेज ट्रांसफार्मर का पूरा लोड करंट (What will be the full load current of 1 KVA, 240 V/120V single phase transformer at 0.8 pf?)

10 / 11

कौन सा तरीका ट्रांसफार्मर के समूह में, 3 चरण ट्रांसफार्मर कार्यरत कनेक्शन के लिए सबस्टेशन पर ट्रांसमिशन लाइन के अंत में होता है? (In which group of transformers, the 3 phase transformer is at the end of the transmission line at the substation for the working connection? )

11 / 11

ट्रांसफार्मर के ब्रिथर में प्रयोग होने वाला ताजा सिलिका जेल किस रंग का होता है? (What color is the fresh silica gel used in breather of transformer?)

Your score is

The average score is 63%

0%

Leave a Comment

Your email address will not be published. Required fields are marked *