250+ AC Circuit MCQs for ITI Electrician Competitive Exam

ITI Electrician NCVT Mock Test - AC Circuit for ncvt online exam

NCVT Mock Test –AC Circuit उन छात्रों के लिए एक उत्कृष्ट संसाधन है जो Technical Competition Exam की तैयारी कर रहे हैं सफलता पाना चाहते है।”

ITI Electrician MCQ

250+ AC Circuit MCQs  ITI  Electrician के उन छात्रों के लिए एक महत्वपूर्ण संसाधन है जो विभिन्न सरकारी और निजी क्षेत्र की परीक्षाओं की तैयारी कर रहे हैं। इसमें इलेक्ट्रिशियन ट्रेड से संबंधित सभी जरूरी विषयों जैसे कि बेसिक इलेक्ट्रिसिटी, वायरिंग, मोटर, इंस्ट्रूमेंटेशन, और सेफ्टी से जुड़े बहुविकल्पीय प्रश्न (MCQs) शामिल हैं। यह टेस्ट सीरीज़ न केवल ज्ञान को मजबूत करती है, बल्कि परीक्षा में समय प्रबंधन और प्रश्न हल करने की क्षमता को भी बढ़ाती है। नियमित अभ्यास से उम्मीदवार अपनी सफलता की संभावनाओं को कई गुना बढ़ा सकते हैं।

NCVT Mock Test- AC Circuit

ITI Electrician Nimi Mock Test -AC Circuit for ncvt online exam

Mix प्रत्यावर्ती धारा सिद्धांत (AC Theory) (Q101-150) Part 1

1 / 20

किसी शुद्ध ज्या तरंग के लिए प्रत्यावर्ती धारा का औसत मान (Average value of alternating current for a pure sine wave )

2 / 20

ए.सी. सर्किट में अधिकतम करन्ट की शर्त है- (AC The condition of maximum current in the circuit is- )

3 / 20

ए.सी. समान्तर परिपथ में एडमिटेन्स (४) का मात्रक है (AC The unit of admittance (4) in parallel circuit is )

4 / 20

केपेसिटिव परिपथ में पावर फैक्टर का मान होता है - (The value of power factor in a capacitive circuit is – )

5 / 20

कौन-सा आपूर्ति स्रोत ध्रुवीयता को अचर रूप से बदलता है? (Which supply source changes polarity continuously? )

6 / 20

साइनसोइडल तरंग के लिए फॉर्म फैक्टर होता है- (The form factor for sinusoidal wave is- )

7 / 20

निम्न में से कौन-सा सम्बन्ध असत्य है (Which of the following relations is false )

8 / 20

यदि एक कॉन्टैक्टर 220 वोल्ट डी.सी. के लिए अभिकल्पित है और उसे 220 वोल्ट ए.सी. स्रोत से संयोजित कर दिया जाए, तो (If a contactor is 220 V D.C. It is designed for and is powered by 220 V AC. If connected to the source, )

9 / 20

2kHz फ्रीक्वेन्सी का आवधिक काल कितना होगा? (What will be the periodic period of 2kHz frequency? )

10 / 20

रिएक्टेन्स के व्युत्क्रम को कहते हैं (The reciprocal of the reactance is called )

11 / 20

ए.सी.का औसत व इफेक्टिव मान क्रमशः होता है (The average and effective values ​​of AC are respectively )

12 / 20

पावर फैक्टर को बढ़ाया जा सकता है - (Power factor can be increased by – )

13 / 20

निम्नलिखित कथनों पर विचार कीजिए। कथन । वह प्रत्यावर्ती राशि जो दूसरी प्रत्यावर्ती राशि की अपेक्षा पहले अपने शिखर मान पर पहुँचे, लैगिंग राशि कहलाती है।कथन II वह प्रत्यावर्ती राशि जो दूसरी प्रत्यावर्ती राशि की अपेक्षा बाद में अपने शिखर मान पर पहुँचे, लीडिंग राशि कहलाती है। उपरोक्त कथनों में से कौन-सा/से कथन सही है/हैं? (Consider the following statements. statement . The alternating quantity which reaches its peak value earlier than the other alternating quantity is called lagging quantity. Statement II The alternating quantity which reaches its peak value later than the other alternating quantity is called leading quantity. Which of the above statements is/are correct? )

14 / 20

पावर फैक्टर बढाने के लिए केपेसिटर की रेटिंग होती है (Capacitors are rated to increase power factor. )

15 / 20

निम्नलिखित कथनों पर विचार कीजिए। कथन । ए.सी. का पीक फैक्टर 1.414 होता है। कथन II ए.सी. का फॉर्म फैक्टर 1.11 होता है। उपरोक्त कथनों में से कौन-सा/से कथन सही है/हैं? (Consider the following statements. statement . AC The peak factor is 1.414. Statement II AC The form factor is 1.11. Which of the above statements is/are correct? )

16 / 20

ए.सी. परिपथ में फॉर्म फैक्टर (form factor) का मान है (AC The value of form factor in the circuit is )

17 / 20

7 ए.सी. के किस मान को एम्पियर वोल्टमीटर में मापते हैं - (7 AC Which value is measured in ampere voltmeter? )

18 / 20

कैपेसिटिव रिएक्टैन्स का मात्रक क्या होता है? (What is the unit of capacitive reactance? )

19 / 20

यदि ए.सी. परिपथ में वोल्टेज तथा धारा का फेज अन्तर (phase difference) 90° हो तो पावर होगी (If AC If the phase difference of voltage and current in the circuit is 90° then the power will be )

20 / 20

फ्रिक्वेन्सी के सीधे अनुपात में होता है - - ( is in direct proportion to frequency - - )

Your score is

The average score is 69%

0%

ITI Electrician Nimi Mock Test -AC Circuit for ncvt online exam

Mix प्रत्यावर्ती धारा सिद्धांत (AC Theory) (Q101-150) Part 2

1 / 11

50 Hz की आवृत्ति के लिए समय अवधि क्या है? (What is the time period for a frequency of 50 Hz? )

2 / 11

कैपेसिटिव ए.सी. परिपथ में (Capacitive AC in the circuit )

3 / 11

142 निम्न में से कौन-सा संधारित्र किस कार्य हेतु प्रयुक्त किया जाता है? संधारित्र कार्य A. नियत मान संधारित्र (i) सोडियम लैम्प B. परिवर्तनीय मान संधारित्र (ii) इलेक्ट्रॉनिक यन्त्रों/ उपकरणों में C. ऑयल परावैद्युत संधारित्र (iii) रिसीवर्स तथा ट्रांसमीटर्स में D. समायोजनीय मान संधारित्र (142 Which of the following capacitors is used for which purpose? Capacitor Function A. Fixed value capacitor (i) Sodium lamp B. Variable value capacitor (ii) In electronic instruments/appliances C. Oil dielectric capacitor (iii) In receivers and transmitters D. Adjustable value capacitor )

4 / 11

एक संधारित्र को 230 वोल्ट ए.सी. इसकी वोल्टेज रेटिंग होनी चाहिए परिपथ में संयोजित किया गया है। (A capacitor is connected to 230 V AC. It must have the voltage rating it is connected to in the circuit. )

5 / 11

4पिको फैरड मान प्रत्येक के दो संधारित्र श्रेणी-क्रम में संयोजित किए जाते हैं। उनकी कुल धारिता होगी ( (Two capacitors each of 4 pico farad value are connected in series. Their total holding will be ( )

6 / 11

एक प्रेरकीय परिपथ में 0.015 हेनरी प्रेरकत्व के साथ श्रेणी में 2 ओम प्रतिरोध जुड़ा है। ज्ञात करें (i) धारा (ii) 50 Hz, 200 वोल्ट आपूर्ति के आर-पार जोड़ने पर शक्ति गुणांक। (An inductive circuit has a 2 Ohm resistance connected in series with 0.015 Henry inductance. Find (i) the current (ii) the power factor when connected across a 50 Hz, 200 V supply. )

7 / 11

143 चित्र में कौन-सा संधारित्र प्रदर्शित किया गया है? 88 1 MFD 2000 V (143 Which capacitor is shown in the figure? 88 1 MFD 2000 V )

8 / 11

एक सर्किट में 10 A की धारा 30° लैग (lag) के साथ बहती है, जब लगाया गया वोल्टेज 100V है, तो सर्किट प्रतिरोध और रिएक्टेन्स ज्ञात कीजिए। (In a circuit a current of 10 A flows with 30° lag, when the applied voltage is 100V, find the circuit resistance and reactance. )

9 / 11

वोल्टेज के सापेक्ष इन्डक्टिव परिपथ में धारा होती है (The current in an inductive circuit is proportional to the voltage. )

10 / 11

135 एक सर्किट में 10 A की धारा 30° लैग (lag) के साथ बहती है, जब लगाया गया वोल्टेज 100V है, तो सर्किट प्रतिरोध और रिएक्टेन्स ज्ञात कीजिए। (135 A current of 10 A flows in a circuit with 30° lag, when the applied voltage is 100V, find the circuit resistance and reactance. )

11 / 11

60 Hz पर 125 V की बोल्टता संधारित्र से श्रेणी में संयोजित अप्रेरणिक (नॉन-इण्डक्टिव) प्रतिरोध के आर-पार प्रयुक्त है। परिपय में धारा 22 A है। प्रतिरोध में शक्ति हानि 96.8 W और संधारित्र में शक्ति हानि उपेक्षणीय है। प्रतिरोध और धारिता का परिकलन कीजिए (A voltage of 125 V at 60 Hz is applied across a non-inductive resistance connected in series with a capacitor. There is section 22A in the circuit. The power loss in the resistor is 96.8 W and the power loss in the capacitor is negligible. Calculate resistance and capacitance )

Your score is

The average score is 56%

0%

0%
ITI Electrician Nimi Mock Test -AC Circuit for ncvt online exam

Mix प्रत्यावर्ती धारा सिद्धांत (AC Theory) (Q151-200) Part 1

1 / 20

1. निम्न में से कौन-सा एक 3-फेज ए.सी. आपूर्ति का गुण नहीं है? (Which of the following is a 3-phase AC? Is supply not a quality?)

2 / 20

2. प्रत्यावर्ती धारा व बोल्टेज सरल रेखा से निरूपित होते हैं, तथा परिमाण वह दिशा ऐरो हैड से निरूपित होता है। यह निरूपण क्या कहलाता है? (Alternating current and voltage are represented by straight lines, and the magnitude and direction are represented by arrow heads. What is this representation called?)

3 / 20

3. किसी शुद्ध प्रतिरोधी परिपथ का पावर फैक्टर क्या है? (What is the power factor of a pure resistive circuit?)

4 / 20

4. शुद्ध इंडक्टिव सर्किट में पावर होती है (Power in a pure inductive circuit is)

5 / 20

5. उस तार के प्रतिरोध का मान क्या होगा जिसका 5052 इम्पीडेन्स 0.8 पावर फैक्टर पर 240V से समायोजित है ( (What will be the value of resistance of a wire whose 5052 impedance is adjusted to 240V at 0.8 power factor ()

6 / 20

6. सदिश राशियों को हल करने की एक विधि है....... (There is a method of solving vector quantities...)

7 / 20

7. सभी ए.सी. मशीनें दर्शायी जाती है (All AC machines are shown)

8 / 20

8. चालकता का विलोम शब्द क्या है? (What is the opposite word for conductivity? )

9 / 20

9. निम्न में से कौन रिएक्टिव पावर का एक सही मात्रक है? (Which of the following is a correct unit of reactive power?)

10 / 20

10. 3. फेज सिस्टम में, 3 फेज वोल्टेज कोण द्वारा प्रतिस्थापित होता है। (3. In a phase system, the 3 phase voltage is replaced by an angle.)

11 / 20

11. शुद्ध कैपेसिटैंस सर्किट में करंट व वोल्टेज होती है (Pure capacitance is the current and voltage in the circuit.)

12 / 20

12. पावर फैक्टर बढाने के लिए कंडेंसर लगाया जाता है (Condenser is used to increase power factor)

13 / 20

13. IR-L-C श्रेणी परिपथ का परिणामी प्रतिघात होता है (The resultant reactance of IR-L-C series circuit is)

14 / 20

14. एक ए.सी. सर्किट में kW/kVA का अनुपात होता है..... ( An AC The ratio of kW/kVA in a circuit is.....)

15 / 20

15. एक 0.85 लैगिंग पावर फैक्टर वाले लोड की इनपुट 10KVA है इसकी पावर किलोवाट में होगी (The input of a load with 0.85 lagging power factor is 10KVA. Its power in kilowatts will be)

16 / 20

16. ए.सी. सर्किट में पावर फैक्टर मालूम करने का सूत्र है (AC The formula to find power factor in a circuit is)

17 / 20

17. एक ए.सी. सर्किट में रिएक्टिय पावर का सूत्र है (An AC The formula for reactive power in a circuit is)

18 / 20

18. इंडक्टिव रिएक्टेंस की इकाई हैं (The unit of inductive reactance is )

19 / 20

19. एक श्रेणी R-C परिपथ का प्रतिरोध 5 ओम तथा कैपेसिटिव प्रतिघात 12 ओम है, तो उसकी प्रतिबाधा (इम्पीडेन्स) है (If the resistance of a series R-C circuit is 5 ohms and capacitive reactance is 12 ohms, then its impedance is)

20 / 20

20. वह आवृत्ति जिस पर X₁ = XC होता है, कहलाती है (The frequency at which X₁ = XC is called)

Your score is

The average score is 57%

0%

Important Links -

Leave a Comment

Your email address will not be published. Required fields are marked *