Nimi Mock Test -3 Phase Motor ITI Electrician latest update

Nimi Mock Test ITI Electrician 3 phase motor

Free Bharat Skills NIMI Mock Test, NCVT ITI Exam Study Material, Notes, MCQ Test Series, Bharat Skills NIMI Question Bank, DGT Syllabus तथा Latest Job एवं Career Notifications यहाँ उपलब्ध हैं।

यहाँ आपको ITI Exam Updates, ITI Result, Marksheet, Admit Card, Latest Jobs News, Career Updates एवं महत्वपूर्ण Notifications की जानकारी भी प्राप्त होगी।

NIMI Mock Test - 3 Phase Motor

ITI की परीक्षा ऑनलाइन (CBT) होती है, जिसमें Objective Type प्रश्न पूछे जाते हैं। अधिकांश प्रश्न NIMI Question Bank पर आधारित होते हैं, जिनकी प्रैक्टिस आप NIMI Mock Test के माध्यम से कर सकते हैं।

ITI के सभी Trades के विद्यार्थियों के लिए NIMI Mock Test, ITI NCVT Exam की तैयारी हेतु बहुत महत्वपूर्ण है। यदि आप ITI NCVT Exam देने वाले हैं, तो नीचे दिए गए Trades के Mock Test आपकी तैयारी को बेहतर बनाने में सहायक होंगे।

AC 3 Phase Motor के NIMI Mock Test नीचे दिए गए हैं |

Nimi Mock Test ITI Electrician 3 phase motor

3 Phase Motor Part 1

कुल प्रश्न - 50

समय - 60 मिनट

1 / 50

1. Calculate the number of coils /phase/ pole for a 3 phase double layer distributed winding for a motor having 36 slots, 36 coils and 4 poles. (36 स्लॉट, 36 कॉइल और 4 पोल वाले मोटर के लिए 3 फेज डबल लेयर डिस्ट्रीब्यूटेड वाइंडिंग में कॉइल/फेज/पोल की संख्या की गणना करें।)

2 / 50

2. What are the two functional circuits incorporated with a three phase motor starter? (तीन फेज मोटर स्टार्टर में कौन-कौन से दो कार्यात्मक सर्किट शामिल होते हैं?)

3 / 50

3. What is the speed control method of 3 phase induction motor? (3 फेज इंडक्शन मोटर की गति नियंत्रण विधि क्या है?)

4 / 50

4. Which loss is determined by no load test of 3 phase induction motor? (तीन फेज इंडक्शन मोटर के नो लोड टेस्ट द्वारा कौन सी हानि निर्धारित की जाती है?)

5 / 50

5. Which type of wire is used for rewinding of
A.C 3 phase motors? (एसी 3 फेज मोटरों की रिवाइंडिंग के लिए किस प्रकार के तार का उपयोग किया जाता है?
)

6 / 50

6. Which device is used to test stator winding short and open fault? (स्टेटर वाइंडिंग में शॉर्ट सर्किट और ओपन सर्किट की खराबी का पता लगाने के लिए किस उपकरण का उपयोग किया जाता है?)

7 / 50

7. How the voltage is received in the rotor of induction motor? (इंडक्शन मोटर के रोटर में वोल्टेज कैसे प्राप्त होता है?)

8 / 50

8. What is the synchronous speed of a A.C 3 phase induction motor having 6 poles at
a frequency of 50 Hertz? (50 हर्ट्ज़ की आवृत्ति पर 6 ध्रुवों वाले एक एसी 3 फेज प्रेरण मोटर की तुल्यकालिक गति क्या है?)

9 / 50

9. What is the synchronous speed of a A.C 3 phase induction motor having 6 poles at
a frequency of 50 Hertz? (50 हर्ट्ज़ की आवृत्ति पर 6 ध्रुवों वाले एक एसी 3 फेज प्रेरण मोटर की तुल्यकालिक गति क्या है?)

10 / 50

10. Which is the cause for the 3 phase motor starter with single phase preventer trips frequently? (सिंगल फेज प्रिवेंटर वाले थ्री फेज मोटर स्टार्टर के बार-बार ट्रिप होने का कारण क्या है?)

11 / 50

11. What happens to a 3 phase induction motor, if one phase fails during starting? (यदि किसी 3 फेज इंडक्शन मोटर का एक फेज स्टार्ट होने के दौरान फेल हो जाए तो क्या होगा?)

12 / 50

12. What is the defect, if starter with single phasing preventer does not switch ‘ON’? (यदि सिंगल फेजिंग प्रिवेंटर वाला स्टार्टर 'चालू' नहीं होता है, तो इसमें क्या खराबी है?)

13 / 50

13. What is the name of the starter symbol? (स्टार्टर सिंबल का नाम क्या है?)

14 / 50

14. Which type of testing of winding is illustrated? (यहां वाइंडिंग के किस प्रकार के परीक्षण का उदाहरण दिया गया है?)

15 / 50

15. Calculate the number of coils per phase per pair of poles of 3 phase motor having 2 pole, 24 slots,12 coils? (2 पोल, 24 स्लॉट और 12 कॉइल वाले 3 फेज मोटर के प्रत्येक पोल के जोड़े में प्रति फेज कॉइल की संख्या की गणना करें?)

16 / 50

16. Calculate the phase displacement in terms of slots for a 3 phase, 36 slots, 12 coils, 4 pole stator winding? (एक 3 फेज, 36 स्लॉट, 12 कॉइल, 4 पोल स्टेटर वाइंडिंग के लिए स्लॉट के संदर्भ में फेज विस्थापन की गणना करें?)

17 / 50

17. What is the electrical degree of 6 pole stator of motor? (मोटर के 6 पोल स्टेटर की विद्युत डिग्री क्या है?)

18 / 50

18. What is the name of the diagram used for 3phase motor winding? (3-फेज मोटर वाइंडिंग के लिए उपयोग किए जाने वाले आरेख का नाम क्या है?)

19 / 50

19. Name the part marked as ‘X’ of the winding machine? (वाइंडिंग मशीन के जिस भाग को ‘X’ से चिह्नित किया गया है, उसका नाम बताइए?)

20 / 50

20. Which is the demerit of 3 phase concentric winding? (तीन फेज संकेंद्रित वाइंडिंग की क्या खामी है?)

21 / 50

21. What is the name of the starter symbol? (स्टार्टर सिंबल का नाम क्या है?)

22 / 50

22. What is the name of 3 phase motor winding, if the coil pitch is less than pole pitch? (यदि कॉइल पिच, पोल पिच से कम हो तो 3 फेज मोटर की वाइंडिंग का नाम क्या होगा?)

23 / 50

23. What is the name of the winding? (इस वाइंडिंग का नाम क्या है?)

24 / 50

24. Which speed is called as synchronous speed in 3 phase induction motor? (3 फेज इंडक्शन मोटर में किस गति को सिंक्रोनस गति कहा जाता है?)

25 / 50

25. Which type of handle design of rotary switch is illustrated? (यहां किस प्रकार के रोटरी स्विच के हैंडल डिजाइन का चित्र दिखाया गया है?)

26 / 50

26. Determine the torque in newton metres produced by a 7.5 HP squirrel cage motor rotating at 1440 rpm? (1440 आरपीएम पर घूमने वाली 7.5 एचपी स्क्विरल केज मोटर द्वारा उत्पन्न टॉर्क (न्यूटन मीटर में) ज्ञात कीजिए?)

27 / 50

27. Where the panel boards are used? (पैनल बोर्ड कहाँ उपयोग किए जाते हैं?)

28 / 50

28. Which type of winding has more space for cooling? (किस प्रकार की वाइंडिंग में शीतलन के लिए अधिक स्थान होता है?)

29 / 50

29. What is the name of the coil winding? (कुंडली की वाइंडिंग का नाम क्या है?)

30 / 50

30. What is the function of collar? (कॉलर का कार्य क्या है?)

31 / 50

31. What is the type of rewinding process? (रिवाइंडिंग प्रक्रिया किस प्रकार की होती है?)

32 / 50

32. What is the name of AC coil winding? (एसी कॉइल वाइंडिंग का नाम क्या है?)

33 / 50

33. What is the name of the part marked as ‘X’? (‘X’ से चिह्नित भाग का नाम क्या है?)

34 / 50

34. Which operation the control circuit is used? (नियंत्रण परिपथ किस क्रियाविधि में उपयोग किया जाता है?)

35 / 50

35. What is the type of A.C motor stator winding? (एसी मोटर के स्टेटर वाइंडिंग का प्रकार क्या है?)

36 / 50

36. What is the name of the contact marked as ‘X’? (‘X’ से चिह्नित संपर्क का नाम क्या है?)

37 / 50

37. Which formula is used to calculate the total electrical degree in stator of an A.C motor? | A.C मोटर के स्टेटर में कुल विद्युत डिग्री की गणना करने के लिए किस सूत्र का उपयोग किया जाता है?

38 / 50

38. What is the fuse rate to run a 10 HP three phase induction motor at full load? | पूर्ण लोड पर 10 एचपी तीन कला प्रेरण मोटर चलाने के लिए फ्यूज दर क्या है?

39 / 50

39. Which formula is used to calculate percentage slip of an AC 3 phase induction motor? | एसी 3 कला इंडक्शन मोटर की प्रतिशत स्लिप की गणना करने के लिए किस सूत्र का उपयोग किया जाता है

40 / 50

40. What is the phase displacement between windings in 3 phase motor? | 3 कला मोटर में वाइडिंग के बीच कला विस्थापन क्या है

41 / 50

41. Calculate the percentage slip in a 3 phase induction motor having 6 poles with a frequency of 50 Hertz rotating with actual speed of 960 rpm? | 3 कला इंडक्शन मोटर मेंप्रनतशत ह्स्क्लप की गणना करें, ह्जसमें50 ह्कज़ की आवह्रत्त केसाथ 6 ध्रुव होतेहैं, जो 960 आरपीएम की वास्क्तववक गनत केसाथ घमू तेहैं?

42 / 50

42. What is the rotor frequency of a 3 phase squirrel cage induction motor at the time of starting? | 3 कला की ह्स्क्क्वरल के ज प्रेरण मोटर की रोटर आवह्रत्त क्या है?

43 / 50

43. Which method is applied to control the speed of 3 phase squirrel cage induction motor from its rotor side? | अपने रोटर पक्ष से 3 कला स्क्विरल केज प्रेरण मोटर की गति को नियंत्रित करने के लिए कौन सी विधि आरोपित की जाती है?

44 / 50

44. Which loss of 3 phase induction motor is determined by blocked rotor test? | अवरुद्ध रोटर परीक्षण द्वारा 3 कला प्रेरण मोटर का कौन सा नुकसान निर्धारित किया जाता है

45 / 50

45. Why pre heating is necessary for motors before varnishing in rewinding process? | रिवाइंडिंग प्रक्रिया में वार्निशिंग से पहले मोटर के लिए प्री हीटिंग क्यों आवश्यक है?

46 / 50

46. Which type of test is conducted using internal growler in AC motor winding? | एसी मोटर वाइंडिंग में आंतरिक ग्राउलर का उपयोग करके किस प्रकार का परीक्षण किया जाता है?

47 / 50

47. What is the purpose of using rotor resistance starter to start 3 phase slip ring induction motor? | 3 कला स्लिप रिंग इंडक्शन मोटर शुरू करने के लिए रोटर प्रतिरोध स्टार्टर का उपयोग करने का उद्देश्य क्या है?

48 / 50

48. Which method of speed control is only applicable for 3 phase slipring induction motor? | गति नियंत्रण की कौन सी विधि केवल 3 कला की स्लिप रिंग इंडक्शन मोटर के लिए आरोपित है?

49 / 50

49. Which type of AC motor winding having the number of coil/pole/phase is more than one arranged in different slots? | कॉइल / पोल / कला की संख्या वाले एसी मोटर वाइंडिंग किस प्रकार के अलग- अलग स्लॉट में व्यवस्थित होते हैं?

50 / 50

50. Why external resistance is included in the rotor circuit at starting through 3 phase slipring induction motor starter? | स्टाटिंग में रोटर सर्किट में बाहरी प्रतिरोध को 3 फेज स्लिपरिंग इंडक्शन मोटर स्टार्टर के माध्यम से क्यों शामिल किया गया है?

Your score is

The average score is 41%

0%

Nimi Mock Test ITI Electrician 3 phase motor

AC Three Phase Motor Part 2

कुल प्रश्न - 35

समय - 60 मिनट

1 / 32

1. What is the purpose of using thermal cutout in addition to fuse in A.C motor circuit? | A.C मोटर सर्किट में फ्यूज के अलावा थर्मल कटआउट का उपयोग करने का उद्देश्य क्या है?

2 / 32

2. Which type of motor is used to provide high starting torque at variable speed? | परिवर्तित गति पर उच्च प्रारंभिक बलाघूर्ण प्रदान करने के लिए किस प्रकार की मोटर का उपयोग किया जाता है?

3 / 32

3. What is the relation between torque and slip in an A.C induction motor? | A.C इंडक्शन मोटर में बलाघूर्णऔर स्लिप के बीच क्या संबंध है?

4 / 32

4. What is effect of A.C induction motor if rotor bar is in open circuit? | यदि खुले सर्किट में रोटर बार हो तो A.C इंडक्शन मोटर का क्या प्रभाव होता है?

5 / 32

5. Which material is used as wedges in winding process? | वाइंडिंग प्रक्रिया में वेजेज के रूप में किस सामग्री का उपयोग किया जाता है?

6 / 32

6. Which test in winding is essential before giving supply? | आपूर्ति देने से पहले वाइंडिंग में कौन सा परीक्षण आवश्यक है?

7 / 32

7. Why the rotor bars are mounted in a slightly skewed position in 3 phase motor? | रोटर चालकों को 3 कला मोटर में थोड़ी तिरछी स्थिति में क्यों रखा जाता है?

8 / 32

8. Which method of speed control two variable speeds only obtained in 3 phase motor? | 3 कला मोटर में गति को नियंत्रित करने की कौन सी विधि में केवल दो चर गति प्राप्त होती है?

9 / 32

9. What is the function of timer in automatic star delta starter? | स्वचालित स्टार डेल्टा स्टार्टर में टाइमर का कार्य क्या है?

10 / 32

10. Why slip ring induction motor is fitted with wound rotor? | स्लिप रिंग इंडक्शन मोटर को वाउंड रोटर से क्यों फिट किया जाता है?

11 / 32

11. Which instrument is used to measure insulation resistance of a 3 phase induction motor? | 3 कला प्रेरण मोटर के इन्सुलेशन प्रतिरोध को मापने के लिए किस उपकरण का उपयोग किया जाता है?

12 / 32

12. Which test in winding is illustrated? | वाइंडिंग में कौन सा परीक्षण सचित्र है?

13 / 32

13. What is the starting current of an A.C 3 phase induction motor? | A.C3 फेज इंडक्शन मोटर का प्रारंभिक करंट क्या है?

14 / 32

14. Which method is used to control the speed of 3 phase induction motor from stator side? | स्टेटर साइड से 3 कला इंडक्शन मोटर की गति को नियंत्रित करने के लिए किस विधि का उपयोग किया जाता है?

15 / 32

15. Which is the main property of leatheroid paper insulation? | लेदरॉइड पेपर इन्सुलेशन का मुख्य गुण कौन सा है?

16 / 32

16. Which type of insulating material is selected for binding the coils and over hangs? | कुंडल और ओवर हैंग बांधने के लिए किस प्रकार की इंसुलेटिंग सामग्री का चयन किया जाता है?

17 / 32

17. Which insulation is used for cuffing in AC winding? | एसी वाइंडिंग में कफिंग के लिए किस इंसुलेशन का उपयोग किया जाता है?

18 / 32

18. What refers coil in AC winding? | एसी वाइंडिंग में कॉइल को क्या कहते हैं?

19 / 32

19. Which type of AC winding the number of coil/pole/phase is more than one at different pitches? | किस प्रकार की एसी वाइंडिंग की विभिन्न पिचों पर कुंडली / पोल / कला की संख्या एक से अधिक है?

20 / 32

20. Which type of winding wire is used to wind submersible pump motors? | किस प्रकार के वाइंडिंग तार को सबमर्सिबल पंप मोटर्स को वाइंडिंग करने के लिए उपयोग किया जाता है?

21 / 32

21. What is the reason of long chord winding is avoided in AC motors? | एसी मोटरों में लंबी कॉर्ड वाइडिंग न करने का क्या कारण है?

22 / 32

22. What is the effect of motor, if the rotor windings in slipring induction motor is open circuited at starting? | यदि स्लिप रिंग इंडक्शन मोटर में रोटर वाइंडिंग खुले परिपथ में स्टार्टिंग किया जाता है, मोटर का प्रभाव क्या होता है?

23 / 32

23. What happens to a 3 phase induction motor if one phase fails during running? | यदि एक कला चलने के दौरान विफल हो जाता है तो 3 कला प्रेरण मोटर का क्या होता है

24 / 32

24. What is the effect on 3 phase induction motor if one phase is cut-off during running with load? | लोड के साथ चलने के दौरान एक कला कट-ऑफ होने पर 3 कला इंडक्शन मोटर पर क्या प्रभाव पड़ता है

25 / 32

25. What is the defect in AC 3 phase induction motor runs at low speed if loaded? | लोड होने पर एसी 3 फैज इंडक्शन मोटर में कम गति पर चलने में दोष क्या है?

26 / 32

26. Which fault condition thermal overload relay protects A.C induction motor? | कौन सी दोष स्थिति में थर्मल अधिभार रिले A.C प्रेरण मोटर की रक्षा करता है?

27 / 32

27. What happens to the rotor of a 3 phase induction motor if its speed attains to synchronous speed? | यदि 3 कला इंडक्शन मोटर की रोटर तुल्यकालिक गति को प्राप्त कर लेती है, तो रोटर का क्या होता है?

28 / 32

28. What is the effect of open circuit in rotor of an induction motor? | इंडक्शन मोटर के रोटर में खुले सर्किट का क्या प्रभाव होता है?

29 / 32

29. What is the reason for frequent blowing of fuse after motor running some time? | मोटर के कुछ समय चलने के बाद फ्यूज के लगातार उड़ने का क्या कारण है?

30 / 32

30. What is the formula to calculate the slip speed (Nslip) of 3 phase squirrel cage induction motor? | 3 कला स्क्विरल केज प्रेरण मोटर की स्लिप गति (Nslip) की गणना करने का सूत्र क्या है?

31 / 32

31. What is the type of control circuit? | नियंत्रण सर्किट का प्रकार क्या है?

32 / 32

32. Which type of starter is used to start and run the 3 phase slip ring induction motor? | 3 फेज स्लिप रिंग इंडक्शन मोटर को शुरू करने और चलाने के लिए किस प्रकार के स्टार्टर का उपयोग किया जाता है?

Your score is

The average score is 0%

0%

Test देने से पहले ऊपर दिये गये NIMI MOCK TEST से प्रेक्टिस कर सकते है-

Test Series

उपरोक्त प्रश्न Bharat Skills Portal पर उपलब्ध NIMI Question Bank एवं NCVT CBT Exam Pattern के आधार पर तैयार किए गए हैं। ITI परीक्षा में इसी प्रकार के Objective Type प्रश्न पूछे जाते हैं, तथा इनमें से कई प्रश्न परीक्षा में आने की संभावना रहती है।

बेहतर तैयारी के लिए नीचे दिए गए NIMI Mock Test, MCQ Practice Sets एवं Question Bank से नियमित अभ्यास करें। इससे आपकी Speed, Accuracy तथा CBT Exam Preparation मजबूत होगी।

iti electrician ncvt mock test 3 Phase Induction Motor

MOCK TEST- 3 PHASE INDUCTION MOTOR Q1-50

कुल प्रश्न : 50 

समय : 60 Min

1 / 50

1. जब एक मोटर स्टार्टर क्वाइल सप्लाई से पृथक होती है तो :-- (When a motor is isolated from the starter coil supply:--)

2 / 50

2. कान्टैक्टर का ए.सी. चुम्बक बहुत अधिक हमिंग की आवाज कर रहा है:- (Contactor's AC The magnet is making a lot of humming noise:-)

3 / 50

3. मोटर जल सकती है क्योंकि- (The motor may burn because-)

4 / 50

4. जब तीन फेज मोटर का रोटर को रोक कर परीक्षण किया जाता है, तो स्टेटर में वोल्टेज दी जाती है:- (When a three phase motor is tested by stopping the rotor, the voltage across the stator is given by:-)

5 / 50

5. ए.सी. इलैक्ट्रो मैगनेटिक पोलटिप पर शेडिंग कुण्डली का लगाने का उद्देश्य है:- (AC The purpose of installing shading coil on electromagnetic pole tip is:-)

6 / 50

6. यदि प्रेरण मोटर पर पूर्ण भार से अधिक भार डाल दिया जाये तो इसकी स्लिप बढने के साथ-साथ : (If more load is applied to the induction motor than the full load, then along with the increase in its slip:)

7 / 50

7. स्लिपरिंग प्रेरण मोटर का रोटर स्थिर होने की दशा में रोटर आवृत्ति होती है :- (In the case of rotor of slippering induction motor being stable, the rotor frequency is 🙂

8 / 50

8. चुम्बकीय स्टार्टर, क्लोज्ड़ रहता है:- (Magnetic starter remains closed:-)

9 / 50

9. पाठ्यांक १00 वाट हैं और पूरी भार धारा पर लघुपथ परीक्षण पर पाठ्यांक 1600 वाट हैं अर्ध पूर्ण भार पर लोह हानियाँ क्या होगी? (The reading is 100 watts and the reading on short circuit test at full load current is 1600 watts. What will be the iron losses at half full load?)

10 / 50

10. आप किसी पंप की मरम्मत कर रहे हैं जो पहले से बहुत कम खींचता है। इस दोष के लिए संभव कारण क्यों हो सकता हैं। ( You are repairing a pump that draws much less than before. What could be the possible reason for this defect.)

11 / 50

11. एक इंडक्शन मोटर के शाफ्ट से बनाये जाते हैं। (Are made from the shaft of an induction motor.)

12 / 50

12. एक इंडक्शन मोटर में नो लोड स्लिप आमतौर पर होता है- (No load slip in an induction motor usually occurs-)

13 / 50

13. सामान्य एसी मोटर है- (Common AC motor is-)

14 / 50

14. स्टार डेल्टा स्टार्टर का उपयोग किया जाता है- (Star delta starter is used for- )

15 / 50

15. 3 फेज AC सप्लाई के स्टार कनेक्शन में, लाइन वोल्टेज निम्न में से किसके बराबर होता है? (In star connection of 3 phase AC supply, the line voltage is equal to which of the following?)

16 / 50

16. स्लिप रिंग इंडक्शन मोटर में रोटर होता है। (Slip ring induction motor has a rotor.)

17 / 50

17. 3 फेज इंडक्शन मोटर का फेजक्रम RYB है, तो इंडक्शन मोटर की दिशा को निम्न क्रम से बदला जा सकता है- (If the phase order of a 3 phase induction motor is RYB, then the direction of the induction motor can be changed in the following order-)

18 / 50

18. स्लिप रिंग मोटर का टार्क......होता है- (The torque of a slip ring motor is…)

19 / 50

19. प्रेरण मोटर और जनरेटर के फ्रेम से बने होते हैं। (Induction motors and generators are composed of a frame. )

20 / 50

20. स्लिप रिंग आमतौर पर बनी होती है- (Slip ring is usually made of- )

21 / 50

21. एक इंडक्शन मोटर की रनिंग अवस्था में वोल्टेज की आवृत्ति ....... होती है- (The frequency of the voltage in the running state of an induction motor is… )

22 / 50

22. 50 हर्ट्ज की आवृत्ति पर 2 पोल वाले एक अल्टरनेटर की गति की गणना करें? (Calculate the speed of an alternator having 2 shafts at a frequency of 50 Hz?)

23 / 50

23. एक 3 फेज इंडक्शन मोटर को 4 पोल फ्रीक्वेंसी की आपूर्ति के लिए वाउण्ड किया गया है  यह 1440 rpm की गति से चल रही है। इसकी प्रतिशत स्लिप ज्ञात करें (A 3-phase induction motor is wound on a 4-pole frequency supply and is running at 1440 rpm. Find its percent slip.)

24 / 50

24. किसी इंडक्शन मोटर का टॉर्क सीधा ...........के  समानुपाती होता है? (The torque of an induction motor is directly proportional to...........?)

25 / 50

25. 5 एम्पियर 3 फेज और 50 हर्ट्ज इंडक्शन मोटर में 4% स्लिप है। रोटर की ईएमएफ फ्रीक्वेंसी होगी- (5 ampere 3 phase and 50 Hz induction motor has 4% slip. The emf frequency of the rotor will be-)

26 / 50

26. तीन फेज वाले इंडक्शन मोटर में (In three phase induction motor)

27 / 50

27. इंडक्शन मोटर का टोरक्यू/स्लिप वक्र होताहै (The torque/slip curve of an induction motor is)

28 / 50

28. स्किवरल केज इंडक्शन मोटर की तुलना में स्लिप रिंग मोटर को कहां वरीयता दी जाती है? (Where is a slip ring motor preferred over a squirrel-cage induction motor?)

29 / 50

29. लोड के साथ चलने के दौरान एक फेज कट-ऑफ होने पर 3 फेज इंडक्शन मोटर पर क्या प्रभाव पड़ता है? (What is the effect on a 3 phase induction motor if there is a phase cut-off while running with load?)

30 / 50

30. लोड पर एसी 3 फेज इंडक्शन मोटर का कम गति पर चलने का क्या कारण हो सकता है? (What could be the reason for the motor running at low speed in AC 3 phase induction motor?)

31 / 50

31. कौन सी दोष स्थिति में थर्मल ओवर लोड रिले A.C इंडक्शन मोटर की रक्षा करता है? (Under which fault conditions does the thermal overload relay protect the A.C induction motor?)

32 / 50

32. यदि 3 कला इंडक्शन मोटर की रोटर तुल्यकालिक गति को प्राप्त कर लेती है, तो रोटर का क्या होता है? (If the rotor of a 3 phase induction motor achieves synchronous speed, what happens to the rotor?)

33 / 50

33. इंडक्शन मोटर के रोटर में खुले सर्किट का क्या प्रभाव होता है? (What is the effect of open circuit in the rotor of an induction motor?)

34 / 50

34. चुम्बकीय ओवरलोड रिले की तुलना में ऊष्मीय ओवरलोड रिले (Thermal overload relay compared to magnetic overload relay)

35 / 50

35. मोटर के कुछ समय चलने के बाद फ्यूज के लगातार उड़ने का क्या कारण है? (What causes the fuse to blow continuously after the motor has been running for some time?)

36 / 50

36. 3-फेज DOL स्टार्टर में न्यूनतम निम्न संख्या में संयोजक होने चाहिए (A 3-phase DOL starter should have the following minimum number of connectors)

37 / 50

37. DOL स्टार्टर प्रचालित 3-फेज इण्डक्शन मोटर की 'शॉर्ट सर्किट' अवस्था के लिए (For 'short circuit' condition of DOL starter operated 3-phase induction motor.)

38 / 50

38.  3 फेज मोटर स्टार्टर का सिंगल फेज प्रिवेंटर के साथ बार- बार ट्रिप का कारण कौन सा है? (, What is the reason for frequent trip of 3 phase motor starter with single phase preventer?)

39 / 50

39. जब एक 3-फेज इण्डक्शन मोटर को DOL स्टार्टर से चालू किया जाता है तो प्रारम्भिक धारा होती है (When a 3-phase induction motor is started with a DOL starter, the starting current is)

40 / 50

40. 3 फेज मोटर स्टेटर वाइंडिंग में हैकसॉ ब्लेड रखकरआंतरिक ग्राउलर परीक्षण करते समय  क्वाइल के शार्ट सर्किट दोष  क्या प्रदर्शित करता है? (What does a short circuit fault in the coil indicate while performing an internal growler test by placing a hacksaw blade in the stator winding of a 3 phase motor?)

41 / 50

41.

हस्त-चालित स्टार-डेल्टा स्टार्टर में 'स्टॉप' पुश बटन को के श्रेणी-क्रम में संयोजित किया जाता है (In a manual star-delta starter the 'stop' push button is connected in series to)

 

42 / 50

42. 3 ,फेज 5 HP, 415 V, 50 Hz प्रेरण मोटर से ली जाने वाली धारा को मॉनीटर करने के लिए आपको अमीटर का संयोजन करना है, जो DOL स्टार्टर से संयोजित है। मोटर परिपथ में संयोजन के लिए उपयुक्त अमीटर परिसर (रेंज) है (To monitor the current drawn from a 3-phase, 5 HP, 415 V, 50 Hz induction motor, you have to connect an ammeter which is connected to the DOL starter. The ammeter range suitable for connection in a motor circuit is)

43 / 50

43. मोटर की सुरक्षा के लिए स्टार्टर में थर्मल ओवरलोड रिले (thermal overload relay) का प्रावधान रखा जाता है, ताकि  ................. से बचा जा सके। (To protect the motor, provision of thermal overload relay is made in the starter, so that ................ can be avoided. )

44 / 50

44. स्वचालित स्टार डेल्टा स्टार्टर में टाइमर का कार्य क्या है (What is the function of timer in automatic star delta starter )

45 / 50

45. 3 कला प्रेरण मोटर के इन्सुलेशन प्रतिरोध को मापने के लिए किस उपकरण का उपयोग किया जाता है? (Which instrument is used to measure the insulation resistance of a 3 phase induction motor? )

46 / 50

46. तीन फेज मोटर स्टार्टर में कौन-कौन से दो सर्किट शामिल होते हैं? (What are the two functional circuits involved with a three phase motor starter?)

47 / 50

47. A.C 3 फे ज इंडक्शन मोटर का प्रारंभिक करंट क्या होता है (What is the starting current of A.C 3 phase induction motor? )

48 / 50

48. मोटर मे क्वाइल को बांधने के लिए किस प्रकार की इंसुलेटिंग सामग्री का प्रयोग किया जाता है? (What type of insulating material is used to wrap the coils in a motor?)

49 / 50

49. किस प्रकार के वाइंडिंग तार को सबमर्सिबल पंप मोटर्स को वाइंडिंग करने के लिए उपयोग किया जाता है? (What type of winding wire is used for winding submersible pump motors?)

50 / 50

50. 3 फेज स्लिप रिंग इंडक्शन मोटर को शुरू करने और चलाने के लिए किस प्रकार के स्टार्टर का उपयोग किया जाता है? (Which type of starter is used to start and run a 3 phase slip ring induction motor?)

Your score is

The average score is 51%

0%

iti electrician ncvt mock test 3 Phase Induction Motor

Mock Test - 3 Phase Induction Motor Q51-100

कुल प्रश्न : 50

समय : 60 Min

1 / 32

1. 3  फेज स्लिप रिंग इंडक्शन मोटर में  संयोजन के लिये कितने टर्मिनल होते हैं? (How many terminals are there for connection in a 3 phase slip ring induction motor?)

2 / 32

2. D.O.L. स्टार्टर में नो वोल्ट क्वाइल की सप्लाई  को NO स्विच को छोडने के बाद............. के जरिए बनाए रखा जाता हैं। (In DOL starter, the voltage across the 0 volt coil is maintained after releasing the 0 switch through. )

3 / 32

3. लोड के लिए उपयुक्त मोटर जहाँ समान गति की जरूरत है...... (Motor suitable for loads where uniform speed is required......)

4 / 32

4. अगर पोल की संख्या 'p' है और फ्रीक्वेंसी 'f' है तो सिनक्रोनस स्पीड  होगी............. (If the number of poles is 'p' and frequency is 'f' then the synchronous speed will be.)

5 / 32

5. श्री फेस इंडक्शन मोटर के स्टेटर में उत्पन्न मैगनटिक फील्ड इस गति से चलाती है........ (The magnetic field produced in the stator of a Shri phase induction motor drives it at the speed of........)

6 / 32

6. इनडक्शन मोटर की सिनक्रोनस गति इसकी गति के संदर्भ में है (Synchronous speed of induction motor in terms of its speed is)

7 / 32

7. 3HP से अधिक क्षमता वाले इन्डक्शन मोटर को  DOL स्टार्टर का उपयोग नही करने की सलाह दी जाती है क्योंकि (It is advisable not to use DOL starter for induction motors with capacity more than 3HP because)

8 / 32

8. स्टार्टर को स्विच आन करने पर मैगनटिक कान्टेक्टर बहुत तेजी से कम्पन करता है इसका कारण हो सकता है..... (The magnetic contactor vibrates very fast when the starter is switched on. This may be due to...)

9 / 32

9. एक छोटे कैपेसिटी इन्डक्शन मोटर के लिए प्रयोग होने वाला स्टार्टर का प्रकार है...... (The type of starter used for a small capacity induction motor is......)

10 / 32

10. DOL स्टार्टर द्वारा शुरू की गई 3 फेज इनडक्शन मोटर को शार्ट सर्किट करंट से इसके द्वारा बचाते है..... (The 3 phase induction motor started by DOL starter is protected from short circuit current by...)

11 / 32

11. मैनुअल स्टार डेल्टा स्टार्टर में स्टॉप बटन कनेक्शन इसके सीरीज में (Stop button connection in manual star delta starter in its series)

12 / 32

12. किसी 3 फेस इंडक्शन मोटर के प्रत्येक फेस की वाइंडिंग में फेस के कोण का अंतर निम्न में कितना होता है? (What is the difference in the angle of phase in the winding of each phase of a 3 phase induction motor?)

13 / 32

13. किसी 3 फेस वाली इंडक्शन मोटर के चलने के दौरान यदि सिंगल फेसिंग प्रेवेन्टर के साथ स्टार्टर बार बार ट्रिप कर रहा हो तो इसका संभावित कारण कौन सा है (If the starter with a single phasing preventer is tripping repeatedly while a 3 phase induction motor is running, then what is the possible reason for it?)

14 / 32

14. किसी 10 HP (मेट्रिक) स्क्वोरेल केज इंडक्शन मोटर बनने वाली 167 टॉर्क की गणना न्यूटन मीटर में करें? जब मोटर की 2880 rpm स्पीड हो। (Calculate the 167 torque in Newton meters produced by a 10 HP (metric) squirrel cage induction motor? When the motor speed is 2880 rpm.)

15 / 32

15. जब आवृत्ति 50 हर्ट्ज है और मोटर की गति 500 आरपीएम है तो पोल की संख्या ज्ञात कीजिए (Find the number of poles when the frequency is 50 Hz and the speed of the motor is 500 rpm.)

16 / 32

16. प्रेरण मोटर का फेज सिक्वेंस  RYB   है, तो प्रेरण मोटर की दिशा  निम्नलिखित क्रम से बदला जा सकता है (If the sequence of induction motor is RYB, then the direction of induction motor can be changed by the following sequence (D) 24 (Feb 2017))

17 / 32

17. एक 4  पोल 50 हर्ट्ज प्रेरण मोटर 1470 RPM पर चल रही है। इसकी स्लिप क्या होगी ? (A 4-pole 50 Hz induction motor is running at 1470 RPM. What will be its slip?)

18 / 32

18. स्टैंड पर अभी भी स्लिप का मूल्य है (The slip still has value on the stand)

19 / 32

19. इनमें से कौन एक वैध तुल्यकालिक गति नहीं है? (Which of the following is not a valid synchronous motion?)

20 / 32

20. 3 कला स्लिप रिंग इंडक्शन मोटर शुरू करने के लिए रोटर प्रतिरोध स्टार्टर का उपयोग करने का उद्देश्य क्या है? | (What is the purpose of using a rotor resistance starter to start a 3 phase slip ring induction motor? , )

21 / 32

21. गति नियंत्रण की कौन सी विधि का उपयोग केवल 3 फेज  स्लिप रिंग इंडक्शन मोटर के लिए किया जाता है? (Which method of speed control is used only for 3 phase slip ring induction motor?)

22 / 32

22. जब अधिकतम टॉर्क (बल आघूर्ण) प्राप्त होता है, तो रोटर पावर रोटर पावर फैक्टर ........... होता है- (When maximum torque is achieved, the rotor power factor is _______.)

23 / 32

23. स्पिल रिंग मोटर है (spill ring motor)

24 / 32

24. स्क्विरल केज इंडक्शन मोटर में रोटर स्लॉट थोड़े तिरछे क्यो होते हैं। (Why are the rotor slots in a squirrel cage induction motor slightly slanted?)

25 / 32

25. यदि कोई 3-फेज मोटर केवल 2-फेज पर प्रचालित की जाए, तो यह प्रक्रिया 'सिंगल फेजिंग' कहलाती है। इस प्रक्रिया से मोटर अन्ततः (If a 3-phase motor is operated on 2-phase only, this process is called 'single phasing'. Through this process the motor finally)

26 / 32

26. 3-फेज स्क्विरल केज इण्डक्शन मोटर की रनिंग घूर्णन गति होती है (The running rotational speed of a 3-phase squirrel cage induction motor is)

27 / 32

27. स्लिप-रिंग प्रेरण मोटर की रोटर वाइंडिंग को प्रतिरोधक से जोड़ने का उद्देश्य है (The purpose of slip-ring is to connect the rotor winding of an induction motor to the resistor.)

28 / 32

28. यदि इण्डक्शन मोटर पर पूर्ण भार से अधिक भार डाल दिया जाए तो इसकी स्लिप बढ़ने के साथ-साथ। (If the induction motor is loaded more than its full load, its slip increases.)

29 / 32

29. स्लिप रिंग प्रेरण मोटर में प्रयुक्त तीनों वांइण्डिग्स का संयोजन सामान्यतः होता है (The combination of all three windings used in a slip ring induction motor is usually)

30 / 32

30. A.C इंडक्शन मोटर में बलाघूर्णऔर स्लिप के बीच क्या संबंध है? (What is the relationship between torque and slip in A.C induction motor?)

31 / 32

31. परिवर्तित गति पर उच्च प्रारंभिक बलाघूर्ण प्रदान करने के लिए किस प्रकार की मोटर का उपयोग किया जाता है? (Which type of motor is used to provide high starting torque at variable speed?)

32 / 32

32. स्लिप रिंग इंडक्शन मोटर मे  वाउंड रोटर का उपयोग क्यो किया जाता है? (Why is a wound rotor used in a ring-in-cycle motor?)

Your score is

The average score is 53%

0%

NCVT Online Exam में NIMI Mock Test का महत्व – ITI Electrician

यदि आप ITI Electrician के NCVT Online CBT Exam में अच्छे अंक प्राप्त करना चाहते हैं, तो NIMI Mock Test की नियमित प्रैक्टिस करना अत्यंत आवश्यक है। इससे आपको परीक्षा पैटर्न समझने, प्रश्नों को तेजी से हल करने तथा Accuracy बढ़ाने में मदद मिलती है।

नियमित Mock Test अभ्यास से आपका Confidence बढ़ता है, Time Management बेहतर होता है और NCVT CBT Exam में सफलता की संभावना भी अधिक हो जाती है।

Three Phase Motor से सम्बंधित  Notes  के लिये यहा  Click  करे 

Leave a Comment

Your email address will not be published. Required fields are marked *